Drivers door window regulator and motor.
Printable View
Drivers door window regulator and motor.
Didnt buy it but going to make two round plates about 4" in diameter
and welding a piece of 1.5 pipe about 76mm high to support the awning poles in sandy ground.
Ill get them powder coated a bright colour so I dont lose them.
The laser cutter is forever throwing out round disc's of every size you can think of.
Something else to take ,,,yes but I think it'll come in handy.
That sounds like a good idea. .Quote:
Originally Posted by threedogs
Can use for car awnings or tent awnings in sand or just soft ground..
4" may be a bit over kill..
I think 60-70mm would do..
I have 100mm here thats why I mentioned that size lol
not much difference I suppose from 76 to 100mm, both
would work
Fair enough..
Provent is on its way
purchased a 4" ram head for my snorkel instead of the smaller one supplied by millweld
New mirror.
http://www.nissanpatrol.com.au/forum...016/01/338.jpg
Sent from my iPhone using My thumbs
Some 6mm push air fittings have arrived, so now I can plumb up my air horn
and air tank, when I fit my Pro-locker its then just a matter of fitting a TEE in the system
[QUOTE=growler2058;656012]New mirror.
http://www.nissanpatrol.com.au/forum...016/01/338.jpg
glass mob on regency road took a template and cut mirror for me $15.00 and i used doublesided tape to atach or they will do it for $40.00 installed
you could go to some one closer to you just trace out th stape
Bought this earlier but didn't work but the supplier sent me another one and which works perfect with my iPhone.
http://www.ebay.com.au/itm/Car-Auto-...73?ssPageName=