Mudski GU Build Thread

Very Nice Mark.
Will have to pop around and have a gander at these. Whens the fitting.

Safari do a 4" ram head but its around 130-150. If you have dremel go and get a 2mm end mill. They go straight in the dremel chuck and you can cut any which way as long as you have a steady hand. Otherwise grab yourself a nibbler or cheap air hacksaw.

As for the comp cover and as I said earlier just leave the 3" inlet one in place. Just use a short 3-4" straight adaptor in silicon this will be fine.

Quote:

---

Originally Posted by mudski

Part 2/3 has arrived.... <img src="http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=68157"/> I'm think to maybe even get a 4-3 adapter for the box to intake pipe fitment, put the snorkel and box in, and then do the rest when I get the comp housing.

---

Did you specifically order it with the piping on the snorkel side or is that how it turned up?

I'm sure MB wouldn't mind you borrowing the nibbler mate or bring it over one day and I'll cut it for you.

I've cut a few now, nothing better then cutting someone else's panels ;)

............................

Quote:

---

Originally Posted by mudski

The comp cover on it is 2 3/4 not 3 Mat. The GT3071 only has two inlet options. Neither are 3inch. Ill stick with the Donaldson head as Hitachi near by sell them for about $60. And i might get the mill end bit for my dremel... The air box was just the air box and nothing else. The snorkel came with all the bits needed to attach to the air box. Sent from my SM-P600 using Tapatalk

---

Yeah ok, interesting they now supply a pipe to connect rather then a rubber flange.

I'm glad they listened to customer feedback ;)

...........................

Quote:

---

Originally Posted by mudski

The comp cover on it is 2 3/4 not 3 Mat. The GT3071 only has two inlet options. Neither are 3inch. Ill stick with the Donaldson head as Hitachi near by sell them for about $60. And i might get the mill end bit for my dremel...

Sent from my SM-P600 using Tapatalk

---

Come on mark.... just get a 4"- 2.75" reducer then. Simple.

.............................

Quote:

---

Originally Posted by mudski

Which part are you refering too? The pipe from the snorkel to the elbow into the air box? Sent from my SM-P600 using Tapatalk

---

Yep that part, the pipe on the airbox intake