Hi guys,
Is a tree trunk protector and a equaliser strap the same thing,
Cheers,
Tonks.
Printable View
Hi guys,
Is a tree trunk protector and a equaliser strap the same thing,
Cheers,
Tonks.
No Don't be confused by them , the tree trunk will be nice and wide to spread the load across the tree trunk.
Equaliser can be chain or webbing both have no elastic effect in them, as in to say no stretch. Tree trunk protector will have a higher rating too
No.
A Tree Trunk Protector is a wide strap generally 3m long and used to protect the tree from being ring barked by mongrels that wrap a winch cable around the tree trunk cause they are Lazy Dogs.
An Equaliser strap is often used as a short loop strap between the Two from recovery hooks to "equalise" the recovery pull across both sides of the car rather than all the recovery force going down 1 chassis rail only. It then allows to be connected to to provide a central recovery point.
You can get them in packs of 12 and 24 can't you....... Woops wrong place lmao
Equaliser used or recommened more for IFS 4x4s as well..
But as MR says spreads the load across two points of the chassis therefore equalising load
Thinking glow plugs but cans also come in 12s and 24s lol
Yeah but they are big straps don't see how you could do it some are 4 inches wide.
Best to use each strap for its intended purpose, IMO
Why not TD the loop in the end of the strap is plenty big enough for the tree trunk protector to fit through.
This equalizer is a new fad must have gizmo being marketed. Why not use a tree trunk protector if you have one and multi task an item, equals carrying less gear IMO
When I bought a Tree trunk protector & an equaliser strap they were both the same.
http://4x4direc.myob.net/gallery/STR...r-strap/233856
Cuppa
Beauty, I have two front recovery points, why not use both? Now I don't need to buy two straps.
When you use an equaliser make sure you use a shackle as the "runner" and not just loop it through the end of the strap, the heat caused by the friction can melt either strap while under load.
Scotty
Was just about to make this point.. friction is a huge killer of poly straps.
Also imo if using a bridle strap you would want it at least 6m long. If using a 3m strap they would near be pulling in a 90 degree angle (45 a side from the car) which basically slashes the straps weight capability by around 30% from memory.
To keep your straps capacity at its best you need as straight as possible.. so if you can use a 6m strap your angle would be greatly reduced and capacity increased..
Kallen Westbrook
Owner of
Westy's Accessories
Just to follow, I know this is lifting, but the principle applies..
Any questions ask... Photo from the new nobels app..
http://www.nissanpatrol.com.au/forum...2013/05/90.jpg
Kallen Westbrook
Owner of
Westy's Accessories
Sort of correct,
If you have a a 1 tonne strap ( just an example) and using it as a bridle and you wrapped in around something round that it the same diameter as the distance between your two tow point and connected your snatch strap to that large diameter object( ie a massive sheave block) you would double the capacity of the strap to two tonne, now obviously that would not happen as you would be connecting it to a shackle so this creates an "angle factor". This is the angle created at the shackle so there are 4 rules associated with this and they are , if the angle is 120 degrees the angle factor is 1 which means the 1 tonnes sling is good for 1 tonne, the second is 90 degrees and the angle factor is 1.41 so you bridle is good for 1.41 tonne, the 3rd is 60 degrees with an angle factor of 1.73 so now the bridle is good for 1.73 tonne, and finally 30 degrees with an angle factor of 1.93 so the bridle is good for 1.93 tonne.
Hope this makes sense and it goes for all winching lifting etc
Scotty
Just a note... There is a formula for all angles to get angle factors but the 4 are most commonly used and generally round up to the bigger angle.
Scotty
Oh and while I am at it for those that struggle with angles, if all sides of a triangle are the same you have 60 degrees ie 2 m between tow points and a 4 meter bridle will give you the 60 degrees..
Scotty
Yea that's my thoughts to..
Kallen Westbrook
Owner of
Westy's Accessories
Winch and tree protector. Unless using an extension strap..
Kallen Westbrook
Owner of
Westy's Accessories
If you go from the winch to the tree then you only need one strap (used as a tree trunk protector)
If you were doing a double line pull off a tree and want ed use an equaliser strap bewteen your two front recovery points you'd need two straps. 1 as a trunk protector and 1 as an equaliser
And anyone know why are they called "snatch" blocks anyway ?, you don't snatch with them, ive always thought they should be called winch blocks or winch pulleys ?
I know them as equalising sheaves... But snatch block seems to be a 4wd term for them(slang I guess)
Scotty
Yes i remember the day of the "Tankbulance", and yes the tree was bloody huge !
Thanks for all the pics and detailed info Scotty, plus info about snatch blocks , one thing though, and i think half the reason behind the OP, is ive never seen a bridle/equaliser strap like yours, but heaps of the ones that look exactly like a tree protector (same width), only noticable difference was the strap colour and label/description on strap.
Your bridle actually looks a better way to go to be honest, as its smaller/lighter to carry/pack, plus easy to get a hook/shackle over......... so where do i get one ? (lol)
Thanks Scotty, maybe that post could be put on the safety section or recovery section somewhere? The pics are great
I agree 100% with what you say above, it is not necasarily the way I do it but the level of safety and staying within the equipment specs is the same.
Agree with the statement quoted above as well.
My experience came from owning a IFS Hilux, man I got good at recovering myself!!
I do like to leave some of my gear at home when out with others, BUT take it all if on my own.
My recovery points are up to the task (well I think so) and have not been into this bridle thing, even though I have used my TTP in some instances.
All of a sudden about a year ago I noticed the Bridle Kit was promoted somewhere and now it is a must have item, for me I dont agree. It is a good idea but in my case I do it differently and just as safe.
Out of curiosity how many have a protector for their synthetic whinch rope that is place around the rope and put on abrasive objects where the rope could be damaged?
MSA used to have one but I cant find it on their site, I have one myself and do use it when necessary.
x2, I had assumed that the equalizer strap would just be fed through the loop on the end of a snatch strap (when being snatched obviously) & when doing a double line winch pull that the winch hook would just clip over the equalizer strap? If this is incorrect (& unsafe) I need to get myself a 4th shackle. My thinking was that the additional shackle to connect winch rope to equalizer strap was another potential missile, but hadn't considered friction/heat build up. Can someone clarify please.
Cuppa
My tree trunk protector
http://i1015.photobucket.com/albums/...ps91cb6cd8.jpg
My bridle
http://i1015.photobucket.com/albums/...psf6d221a4.jpg
Showing the width of the tree trunk protector compared to the bridle
http://i1015.photobucket.com/albums/...psd15ff095.jpg
Hope this helps.
Take care out there.
Rossco
I think a few pics of joining straps may be in order, personally I'd never thread it back through the loop.
You can never get them undone. But answering Op they have different ratings and a different purpose,
just use it for what its for, If un sure join a club or do an acreditted course, Reasonably affordable $150???
Again we as Aussie adapt, we have adapted lifting gear to recover in some cases. As for recovery kits Most kits available
will have all you require, all you do is add extra shackles etc to suit your needs. Plus a frayed strap is usless throw it away
or cut and get it re stitched for dragging some light logs around camp, not for snatching