Search:

as promised web site for milweld custom

http://www.millweld.com/a/Rear_Bars

heres a sudjestion for you rear bar this is from milweld customs in victoria in australia will find the web address for you later and post it up for you

I take it you get a bit of rain, lol Heres a scoop we can buy over here, under neath it
has vanes to direct air to front of IC as well as rear. OE scoop RHS , You can feel difference.

love the...

Nice rig mate looks the goods

LSD in the back one of the best in the business. you'll need a locker
in the rainforrests over there

Good job man looks the trick

Great pics, good sensible mods too , so hello and welcome to you,
great bunch of people here,and plenty of info and tips as well
jump in anytime and enjoy

Hi its my handmade rear bar, if anybody interest i can give dimensions.. its total costs about 120 usd for me..
...

Finished off my reverse lights last week, replaced the camera and driving light switches to Carling tech. Rewired the reverse camera.
...

Problem solved, wrong model number supplied, although right part number, on the upside cleaned old MAF sensor and refitted now have bugger all smoke. All good

I was flicking through the ZD30 manual and remembered this thread.

The thermostat is located where the bottom radiator hose enters the rear of the front gear case. There is an alloy section that...

We are right hand drive in Australia (drive on the left side of the road)

The Australian 4.5L (TB45E) has a sticker with the timing info on the top the tappet cover (sometimes called rocker cover,...

G`day Guys
After searching the forums on the best size exhaust for my 2.8 and talking to various exhaust places i finally went with the 3 inch system custom made with mandrell bends to suit the...

Only let down with a auto locker is they are hard to unlock on surfaces with low drag.
Makes changing direction very hard and can cause some probs if the front wont unlock.....ask the boys that used...

I almost put up a post on this very subject. ARB take a very hard line about fitting the rear locker first, they will talk the legs off a table trying to tell you it's a safety thing and that the...