Search:

my story was similar I had the towbar fitted by a known named outlet, first time I towed my camper
I had problems, if it wasnt brake lights it was indicators or the trailer brakes themselves.
I...

Simon,

I am glad you said you have the towbar, as I had a similar problem with my 2003 model, where my lights stopped working too.

My problem was the absolutely crap quality towbar loom with...

Simon are you refering to the lights in the body?? If you are they are blank except for one reverse light.
You can buy a loom from Patrolapart with globe housing and do it yourself. if bumper lights...

Simon,

This might seem like an odd question but do you have the factory towbar?

Mic

No idea on if there are any differences or not but in the GU's the 4.2 and 2.8 use the same air box so surely the snorkel isn't really any different?? It would be more based on what series GU for te...

Well according to our good friend google, the one you require for the RD28 is the SS15HFB.
I don't know enough about these things to say if the one you bought will fit or not, hopefully one of the...

You'll probably find it's the switches. Pull them out and clean them. One of my back ones dont work, The switch itself fell into a million pieces when I pulled it out. But I dont sit in the back, so...

The guys name is Chicken, he is a member here and made his tray to suit the early (GQ) TD42s. At the time I bought 2. I love the one on the GQ. Unfortunately it did not fit the GUIV! Damn it! I...

Try swapping the drivers side rear door switch with the switch from the passengers rear door .

G'day Simon,

I had exactly the same issue on my Explorer the other weekend (I was the gorilla that did it up too tight this time....) and I used a two way three jaw oil filter wrench and a long...

Remember reading years back about a simple tray with a hose attached being made to bolt under the filters to drain oil away during filter change. At the time the poster got several orders from...

G`day Simon
Can you hear the drive when you try to wind it up or down?
If you can hear the drive its a mechanical fault with the winder mech, if no noise then it will be electrical
Either way...

put a plastic bag over it when unscrewing

Sure fire way of removing a stuck filter.

Stab through the thing with a long screw driver and turn..