where's is the Blinker relay located

[altech]

Hi Guys, just got my new relay for my l.e.d. lights that are running to fast for blinkers , have no idea where the relay is, but i can hear it , cheers Alex
Sorry 97 GU ti

[Yendor]

Is it a GU or GQ?

Below the radio on the RHS.

[altech]

Sorry 97 GU ti

[Yendor]

You might be able to get to it by removing the panel from above the pedals and putting your hand up around.

Being a TI, this may not be possible, you may have to remove the panel from around the radio.

[altech]

found it what a place to put it, ? new unit doesn't work , maybe GU wiring different , here a diagram of new unit cheers Alex

[Yendor]

Hi Alex,

I think the pins are in the wrong order.

+ terminal of your relay should go to Red wire with a White stripe
L terminal of your relay should go to a Green wire
- terminal should go to a black wire

If the pins are in the wrong order you can make up a 3 wire jumper harness.

If the pins are in the wrong order there is also a chance you may have damaged the new flasher unit.

Cheers Rodney

[the evil twin]

What Rodney said...

There are two versions of the relay for different vehicles. Identical inside except the +ve pins are reversed.

You need to either ensure you have the correct pin orientation for your truck or make up a small harness to switch the wiring if it is the "wrong" one

[the evil twin]

http://www.ebay.com.au/itm/12V-3-PIN-LED-FLASHER-RELAY-UNIT-BLINKER-INDICATOR-GLOBE-POSITIVE-RIGHT-/190582045454?pt=AU_Car_Parts_Accessories&hash=item2c5f933b0e

http://www.ebay.com.au/itm/12V-3-PIN-LED-FLASHER-RELAY-UNIT-BLINKER-INDICATOR-GLOBE-POSITIVE-LEFT-/310348323356?pt=AU_Car_Parts_Accessories&hash=item4842339a1c

[altech]

Evil twin, this was where I got my relay from the ebay link you highlighted cheers Alex ps just got the wrong 1, LOL

[altech]

All done simple Mod and she a going good mate , thanks for all input to fix this relay cheers Alex