View Full Version : 1st gear
diffhead
4th May 2011, 08:15 PM
hey all, ive an 89 petrol auto GQ on gas. yesterday the old girl wouldnt shift out of first gear while i was driving until i turned the ignition off and on whilst still on the move then all shift patterns were normal. the same thing happened and is still happening . any answers anyone?
molongmick
4th May 2011, 08:19 PM
Welcome to Forum Diffhead, I'm not able to help but others might. Don't forget to give a bit of an into in the introductions page.
Sir Roofy
4th May 2011, 08:32 PM
welcome aboard diffhead
have you checked your oil latly
some one will be along shortly to help out
Bigrig
4th May 2011, 08:39 PM
G'day mate - welcome aboard. Great people, information and laughs on the forum, so don't be shy and join in to make the most of it. Enjoy!!
diffhead
4th May 2011, 09:02 PM
cheers mick
diffhead
4th May 2011, 09:05 PM
hey roofy, always check it... at least twice every 5 years
Sir Roofy
4th May 2011, 09:07 PM
hey roofy, always check it... at least twice every 5 years
i new would do it regular glad to hear
diffhead
4th May 2011, 09:11 PM
ps .. i was only kiddin.. its normal.. changed it recently and nothing on the plug. its just a bit strange that it behaves normally when turning the ignition off and on whilst driving... surely its electrical as a mechanical problem would persist?
Sir Roofy
4th May 2011, 09:14 PM
would be electrical my guess youll have get under and check it for bare wires or loose fittings
could be any thing
diffhead
4th May 2011, 09:25 PM
had a good look around all the looms but nothin is rubbed through and still flexible.. no hard parts apparent. do you know of anyone you could put me in touch with that knows about sensors etc?
diffhead
4th May 2011, 09:30 PM
by the way, im a diesel tech workin for volvo trucks au for 21 years
YNOT
4th May 2011, 09:36 PM
by the way, im a diesel tech workin for volvo trucks au for 21 years
I guessed you were in trucks from your post in the EGR thread.
Tony
diffhead
4th May 2011, 09:38 PM
did you like the thread? tried to make it easy
diffhead
4th May 2011, 09:42 PM
u callin me old? i started cleanin chimneys at 4 then changed to mechanics
YNOT
4th May 2011, 09:46 PM
The purpose of EGR had mostly been explained in the first page of the thread but your information about urea injection was new, and interesting. I've read a bit about urea injection on American engine websites, is it being used in Australia yet?
Tony
YNOT
4th May 2011, 09:49 PM
u callin me old? i started cleanin chimneys at 4 then changed to mechanics
Quick forum tip for ya, posts like this make a bit more sense if you click on "reply with quote" so people can see what post you are replying to (like I did here). It's especially useful on fast moving threads like general banter and night shift.
Tony
diffhead
4th May 2011, 10:21 PM
egr.. hot gasses back into the combustion chamber reduces nox but increases particulates into the atmosphere. egr has only a few years to go before it wont make eu emmission levels............... dead duck......... scr .. injecting urea into the exhaust system to totally eliminate nox is only prehibited by the percentage of urea injected. also so far the price of urea pays for itself per km as it keeps the exhaust system clean and the engine working at full potential.
diffhead
4th May 2011, 10:26 PM
ive been workin with for 4 years
diffhead
4th May 2011, 10:33 PM
basically you can make the biggest maddest 16 carbie 8 turbo engine you could imagine with 64 chambers and all you have to do is inject urea into the exhaust.... no emmissions
diffhead
4th May 2011, 10:56 PM
all new aussie trucks have had to be euro compatible for the last 4 years
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.