PDA

View Full Version : Installing Catch Can ZD30


10G
27th July 2016, 10:43 AM
Guys I just want to confirm that the hose in the attached in pics is the hose I place my catch can in line with.

Thanks.

68295

and ....

68296

Also, what can i use to clean my intercooler and pipes/hoses if I find they are all full of oil and crap?

Thanks for any help.
Orsm6
27th July 2016, 12:10 PM
pretty sure mine was only the first photo. hopefully i've done it right haha
10G
27th July 2016, 12:40 PM
It's the same hose, the 2nd pic just shows where it comes from.
Orsm6
27th July 2016, 02:36 PM
It's the same hose, the 2nd pic just shows where it comes from.

Ha, yeah you're right. photo is a bit misleading when you don't look closely.
10G
28th July 2016, 03:45 PM
No takers???

Most of the pics I've seen have pointed to a hose coming out of an alloy block at right angles to the motor
mudski
28th July 2016, 04:46 PM
If that hoes goes into the air intake hose, on the engine side of the intake hose, then thats the one. If you follow it along from the intake it goes into the rocker cover.

Sent from my GT-N7105T using Tapatalk