What did you buy today

[threedogs]

I'm going to buy this , but mine will be black and white not blue.
Instead of mileage in 5,10,15,20, I'm getting them to mark all so
its 55,56,57,58 etc,
Cost is $73 just for the dial and $15 for every change so $25 extra for
2 alterations, [Discount] Then I'll fit my red leds as well

[my third 256]

here is the link
http://www.ebay.com.au/itm/Nissan-GU-Patrol-2002-2006-WHITE-DIALS-gauge-tacho-speedo-dash-/121156230759?pt=AU_Car_Parts_Accessories&hash=item1c35795e67
also this was talked about 18 months ago

[Clunk]

Instead of mileage in 5,10,15,20, I'm getting them to mark all so
its 55,56,57,58 etc

Won't that look a bit cluttered with all those numbers?

[threedogs]

We decided only till 60kph
besides all cop speedo are similar, well the older style

[taslucas]

I'm going to buy this , but mine will be black and white not blue.
Instead of mileage in 5,10,15,20, I'm getting them to mark all so
its 55,56,57,58 etc,



Won't that look a bit cluttered with all those numbers?

And it won't matter unless the Speedo is calibrated perfectly

[Bloodyaussie]

Speedos dont have to work below 40kmh

[threedogs]

Its only a visual thing, IMO I think it will look better with the extra lines , sorry again if it not what you like
That's all, gee you guys read tooo much into it rlmfao
Mudski has white face dials as well but not sure if he opted for extra lines,
there are heaps of options available

[my third 256]

Speedos dont have to work below 40kmh
what about school crossings and pedestrian crossings arnt they 25 kmph

[growler2058]

what about school crossings and pedestrian crossings arnt they 25 kmph












yup try going through road works at 40

[taslucas]

Its only a visual thing, IMO I think it will look better with the extra lines , sorry again if it not what you like
That's all, gee you guys read tooo much into it rlmfao
Mudski has white face dials as well but not sure if he opted for extra lines,
there are heaps of options available

Nah not reading into it, just putting m2cw in......

[mudski]

Its only a visual thing, IMO I think it will look better with the extra lines , sorry again if it not what you like
That's all, gee you guys read tooo much into it rlmfao
Mudski has white face dials as well but not sure if he opted for extra lines,
there are heaps of options available

Here y'all...
36073

[macca]

Won't that look a bit cluttered with all those numbers?

This is what I thought you were talking about as well, what you mean is the small lines indicating each kph with numbers at 20, 40, 60 etc Could look good.

[MudRunnerTD]

Won't that look a bit cluttered with all those numbers?

I'm with Clunk but he and I may have read your description literally??? Are you saying you are getting the numbers all printed on or just a line for each single km/h between the 10s??


So

0|llll|llll10llll|llll20llll|llll30llll|llll40llll |llll50llll|llll60llll|llll70

[taslucas]

I'm with Clunk but he and I may have read your description literally??? Are you saying you are getting the numbers all printed on or just a line for each single km/h between the 10s??


So

0|llll|llll10llll|llll20llll|llll30llll|llll40llll |llll50llll|llll60llll|llll70

I just went cross eyed

[threedogs]

Line for every k
WOW just like old school speedo
How would it be possible to put the numbers Really
But yes same as Mudskis except mine is white with black

[Winnie]

http://www.nissanpatrol.com.au/forums/images/imported/2013/10/151.jpg

..........

[macca]

Instead of mileage in 5,10,15,20, I'm getting them to mark all so its 55,56,57,58

I thought you must have good eyesight :rolleyes::oops:

[Clunk]

This is what I thought you were talking about as well, what you mean is the small lines indicating each kph with numbers at 20, 40, 60 etc Could look good.


I'm with Clunk but he and I may have read your description literally??? Are you saying you are getting the numbers all printed on or just a line for each single km/h between the 10s??


So

0|llll|llll10llll|llll20llll|llll30llll|llll40llll |llll50llll|llll60llll|llll70


Line for every k
WOW just like old school speedo
How would it be possible to put the numbers Really
But yes same as Mudskis except mine is white with black

ahhhhhhhhhhhh, well that makes more sense........................ as per mudskis pic, looks ok

[Clunk]

http://www.nissanpatrol.com.au/forums/images/imported/2013/10/151.jpg

..........

I thought that was BA's thread about fluid levels

[Punderhead]

Today I bought lunch

Cheers

[LachDiggityDog]

I bought a Harris Hard case and Harris Hard Nose in black! :wink:

[MudRunnerTD]

I bought a Harris Hard case and Harris Hard Nose in black! :wink:

Lucky Lucky Bastard!!!! good job.

[liftlid]

Today I bought a rebreather yahoo!
And the cost of buying a rebreather is a new kitchen. ( I don't get it either?)

[macca]

I bought a Harris Hard case and Harris Hard Nose in black! :wink:

Me too........

[BigRAWesty]

Today I bought a rebreather yahoo!
And the cost of buying a rebreather is a new kitchen. ( I don't get it either?)

Wtf is a rebreather??

[MudRunnerTD]

Today I bought a rebreather yahoo!
And the cost of buying a rebreather is a new kitchen. ( I don't get it either?)

She is soooo selfish Gary!!!! Damn her! You Neeeeed that Rebreather! Nuff'n wrong with the kitchen! Shiiish! Women!!

[my third 256]

took the wife shopping today and purchased these beauties
for her Diwali festival Sunday they bring you wealth
they are the god Ganesh (Hindu)
36109 36110

[liftlid]

Wtf is a rebreather??
it removes the co2 from your breath and allows longer dives.
I can have approx. the same dive time on a 5lt cylinder that I do now on 2x 12lt cylinders.

[Woof]

took the wife shopping today and purchased these beauties
for her Diwali festival Sunday they bring you wealth
they are the god Ganesh (Hindu)
36109 36110

I only looked at the top R/H one and thought that it was a new bucket seat for the Patrol....lol

[boots]

Just bought some universal phone cradles to go in the vehicles . fines are going up and demerit points so don't wont to be stung . My wife is terrible with her phone .

[Dinger]

Hi guys did some early Christmas shopping got the following:
Hpd top mount inter cooler
Full size roof rack
2.5 x 2.5 awning
33" light bar
Phone cradle with rfi antenna
Have a few weeks off before Xmas sp will should keep me busy.

[threedogs]

I brought a Rollie as seen on TV the other day, works well
this one is 2 x eggs and half a cheese slice MMMmmmmm egg

[fxst78]

Bought some more Delo 400, finally got around to buying a bigger oil drain pan, fumoto valve arrived in the mail. Oil change time!

[Shaun 4x4]

I was thinking about starting one of these threads the other day. It's huge on PSB.

Any way didn't buy it today but it's my most recent purchase

Alpinestars Jaws Jacket
http://i1222.photobucket.com/albums/dd483/Shaun0305/Random%20Stuff/20131206_121635.jpg

[threedogs]

Mods may make this a sticky if that's the term.

Nice jacket I kept all my road gear just cause I didn't have the heart to throw it out.
Son bought a Very nice leather jacket for on the road it was too small for him so I brought
it off him. Doubt I'll ride a road bike again but happy to sit around a fire with it on

[Shaun 4x4]

I bought a new bike a couple of weeks ago and since then have gone nuts buying all my gear again.

[Shaun 4x4]

ER6N(L)

http://i1222.photobucket.com/albums/dd483/Shaun0305/Kawasaki%20ER6Nl/20131120_173400.jpg

[threedogs]

BA is a Kwaka man I was a Honda man last ride was a cb1100R single seater only 6 came to Aust and 30 world wide
11.00 sec 1/4mile and 285 kph straight out of the box, should have kept it. would love a project bike
Nice looking bike btw

[Shaun 4x4]

Yer I've always had kwaka dirt bike. Bought a Hyo road bike for something different and got hit by a car within 3 weeks of owning it so decided kwakas are safer. Lol

That's pretty impressive for something that was from the early 80s.

[threedogs]

Yeah 1981 but I like the what they call now naked bike , don't like them all covered in plastic etc.
The motor makes a big statement if dressed up right, but I'm old school, still love my bikes though.
one day things may change, lets hope

[mudski]

Bought some sikaflex from Bunnings getting ready to cut the air box lid and perform the hi flow mod to suit the hi flow MAF housing I splashed out on. Just need to work up the courage to make the first cut. I foobar this its gonna cost dearly...

[threedogs]

@ Mudski with all these mods you're doing what will be the final outcome.

[mudski]

MODs = moar powar!!! Plus its an addiction I have to modify things.

[threedogs]

WE'll have to set up a time next year just to see if there is any difference, cant see it myself, well not noticeable
Best of three over a given distance

[mudski]

After I have done my mods, and I am now thinking of gutting the cat in my 3inch Redback system, I have decided to take the car to JPC and get it dynoed. But I want need to do the MAF voltage mod aswell. Gawd it never ends.

[Waza]

Just bought a 204 pc toolbox from repco for my son $69.00. Now he doesn't have to borrow my tools :)

[threedogs]

@ Waza feel your pain I have two sons.

[Stropp]

i have one son and half my tools, he has a fantastic tool box full of all sorts of tools very similar to ones i used to have !!

[Stropp]

the cross country intercooler is on the way :) paid for today post tomorrow yahoo:icon_victory:

[mudski]

Haha! Thank feck I have girls...
Yes and I have gone and done it again. Bought some cabin filters to do the cabin filter mod. I should take a photo of my work bench, I have more stuff on there of things I have bought but yet to have installed. Heres the list of things sitting here...


RH upper door hinge
Radius arm spacers
radius arm bushes
Bush skinz steering guard
flare seals
Narva 12 blade fuse block
Air locker flexi hose kit
extra AM/Fm Antenna base and lead
HPD Hi flow MAF housing and associated parts
Soon to come the Cabin filter kit
I'm sure there's more if I went out an looked...

I seem to buy stuff when I have the cash to get it, even though I don't have the time to fit it. So it just sits here in my garage. Collecting dust.

[Coldcomfort]

Bought a pair of 3dogs blanking plates fro the 3rd row seating mount holes... Thanks 3dogs!!!

[mudski]

Hey! TD pm me on a price of those plates will ya.. Something else needs to sit in my garage...:)

[mudski]

Today I bought a 120G Samsung 840 SSD for my gaming pc, a 1TB 2.5inch hard drive for my HTPC so I can record more t.v shows....
And I almost forgot! A Factory TD42T!!! Booyeah!!!! Well the transaction hasn't been finalized and its a short motor as the head was cracked, so its missing the head, IP and turbo, but I got it for a bargain and its something for me to slowly build in the garage.
I'm like a pig in chit right now. All I need to do is build both engine and gearbox for them both to be dropped in together.

[Hodge]

Good SSD choice mudski. I have 2 of the 240GB versions running in a RAID array. Windows boots up in seconds. But my 1 week old Silverstone PSU took off 2 days ago, so I'm unsure if it's taken the rest of the gear with it. Shop closed for xmas so cannot get in touch with the bastards for an exchange.

Oh and gratz on the 4.2 !

[Coldcomfort]

http://www.gme.net.au/products/radio-communications/uhf-477mhz-cb-radios/TX3540S

I bought a TX3540S radio for the Patrol....

[mudski]

Today I bought a 120G Samsung 840 SSD for my gaming pc, a 1TB 2.5inch hard drive for my HTPC so I can record more t.v shows....
And I almost forgot! A Factory TD42T!!! Booyeah!!!! Well the transaction hasn't been finalized and its a short motor as the head was cracked, so its missing the head, IP and turbo, but I got it for a bargain and its something for me to slowly build in the garage.
I'm like a pig in chit right now. All I need to do is build both engine and gearbox for them both to be dropped in together.
Yeah I have two Agilty 3's running in raid 0 for the O/S and got this 120G drive just to put Battlefield 4 on it so I can load the maps faster. Now I spawn and am in a Heli or tank before anyone else. Next is 16Gb ram and a GTX780 3Gb card. My U3011 loves to sap the power out of my 580's in SLI.



http://www.gme.net.au/products/radio-communications/uhf-477mhz-cb-radios/TX3540S

I bought a TX3540S radio for the Patrol....
Nice one. Seen those steering wheel buttons by GME. I reckon they'd be good. But no one sells them yet...

[Ian2011]

New Sony front speakers, now to get some for the rear

[Hodge]

Yeah I have two Agilty 3's running in raid 0 for the O/S and got this 120G drive just to put Battlefield 4 on it so I can load the maps faster. Now I spawn and am in a Heli or tank before anyone else. Next is 16Gb ram and a GTX780 3Gb card. My U3011 loves to sap the power out of my 580's in SLI..

Make sure you got a PSU with a beefy rail fed PCI-E for the 780 , supposedly the 3 gig versions suck a ton of juice. And give em plenty of air flow. Unless you've water-cooled the whole thing already LOL.

[lhurley]

Bought a new tx3100 gme UHF last week, and a new alternator and starter battery today.

[megatexture]

Haha! Thank feck I have girls...
Yes and I have gone and done it again. Bought some cabin filters to do the cabin filter mod. I should take a photo of my work bench, I have more stuff on there of things I have bought but yet to have installed. Heres the list of things sitting here...


RH upper door hinge
Radius arm spacers
radius arm bushes
Bush skinz steering guard
flare seals
Narva 12 blade fuse block
Air locker flexi hose kit
extra AM/Fm Antenna base and lead
HPD Hi flow MAF housing and associated parts
Soon to come the Cabin filter kit
I'm sure there's more if I went out an looked...

I seem to buy stuff when I have the cash to get it, even though I don't have the time to fit it. So it just sits here in my garage. Collecting dust.

Mate do you have a Harris hardnose ? If you do and fit the radius arm spacers it will make the hard nose foul on your panhard rod on flex, mine is ATM and I will be removing the spacers and putting in caster correction bushes.

[mudski]

Bush skinz is the same thing...

[Coldcomfort]

New Sony front speakers, now to get some for the rear

Fusion, please have a close look at the fusion speakers. Not the cheapies that super cheap have. Get the better quality ones. Like the RE-CM650's....

[menace 2]

bought rockford fosgates for the front on xmas eve day...havent put them in yet...will be interesting to see what they sound like...anything should be better than the factory ones

[threedogs]

Just changed mine front and rear big difference, OE are all paper 6.5 x 4 ways
Might get a small amp and run the lot off my aux battery, not sure yet

[macca]

Nothing yet...
Got a $100.00 gift card at TJM for Christmas, just waiting for the shops to open again.
Happy Days.

[threedogs]

TJM is open today Macca spend away

[macca]

TJM is open today Macca spend away
Got an hours drive to the nearest, hoping its open Monday. Closed today as far as I know, they need a break too I suppose.

[threedogs]

what do you thin you may buy ,,some straps or update some older gear you have ,if any

[growler2058]

Shortsx3
Jeansx1
t-shirtx1
Singletx1

[threedogs]

who's a pretty boy now LOL
Levi's ???
501s only $35

I brought a Kramer A2 size
http://www.ebay.com.au/itm/Seinfeld-The-Kramer-Painting-QUALITY-CANVAS-PRINT-Tv-Series-Poster-/360802647260?pt=AU_Movie_Memorabilia&hash=item5401837cdc

[growler2058]

Nah from a collapsed sweat shop in Bangladesh $8.50

[threedogs]

did they have road side tailor shops , for custom shirts etc
http://www.ebay.com.au/itm/Transformers-BUMBLEBEE-High-Quality-Canvas-Art-Print-Poster-A4-B-/370904784459?pt=AU_Movie_Memorabilia&hash=item565ba5de4b
did someone mention Bumble Bee

[mudski]

Ship loads of timber for the new/ extra work bench in the garage I'm building. Decided to add another leg in the middle for more support. Checking in on the legs for the frame takes ages but it adds so much strength.
Just need to do the shelf, backing and top and she's done.

[Dazzalco]

Pelican storage case and a set of treds

[mudski]

Pelican storage case and a set of treds

Pics or it didn't happen Dazz. :D

[Dazzalco]

3845438455
There you go Mudski

[mudski]

Thanks. I like pics....

[macca]

what do you thin you may buy ,,some straps or update some older gear you have ,if any

Good question, I have no idea.

[threedogs]

Just reading through this thread Stropp paid for his CC IC on the 8th of DEC and thought it was posted that day.
Think it arrived 19 days later, that's Crip, Wouldn't want to be going away eh

[mudski]

There has always been a wait for CC coolers. Plus being so close to Christmas I can understand the wait. Everyone wants it before Christmas...

[threedogs]

the cross country intercooler is on the way :) paid for today post tomorrow yahoo:icon_victory:
Posted on the 10th I think CC are telling porky pies

[Winnie]

There has always been a wait for CC coolers. Plus being so close to Christmas I can understand the wait. Everyone wants it before Christmas...

I can't remember how long I had to wait for mine but think it was like 10 weeks. I did not pay in full until it was ready to post and then it was overnight.

[menace 2]

bought the hard nose and diff cover today...cant wait to bolt them on...red to match the colour of the car ! :1062:

[Ian2011]

New speakers for the back doors, all installed, Kids are not to impressed apparently its too loud now.

[Stropp]

Posted on the 10th I think CC are telling porky pies

Yeh I tend to agree TD, rang them after a month wait and he said yours will be done today and I will call for payment tomorrow, waited 3 more days and called them again and yes it was ready for posting. They took payment and said it would be posted the next day, it came by courier so normally it only takes 4-5 days to Perth.

[threedogs]

Trying to re-co my GME TX6200 hand held UHF cost me good $$$ for it when one of my sons was working on the road sites, just a bit knocked around.
I'm claiming it back as son is now a boss of company he can afford his own, so checked Ebay and found a belt clip and leather case. Yeah happy I have it back.
I paid for the real GME not the Chinese copy not that I knew of that at the time.

[macca]

Bought this today with an awning that is like new, hardly been used.
Had the travel cover replaced with an Ironman one at some stage.
All for $200
Schweet Poider

[threedogs]

Great pick up Macca who's a happy camper now.
@ mods this thread could be a sticky easy

[macca]

Was going to sell it on eBay for a quick quid, but told my brother about it on Christmas day. You can guess his response. DOH.

So he has scored an early model ARB roof top tent with awning for naf all.

[Shaun 4x4]

I bought a new truck. It's the big one!

http://i1222.photobucket.com/albums/dd483/Shaun0305/Random%20Stuff/20131227_210457.jpg

[macca]

Reckon they would be fun, torment the cactus out of the dog and the chooks.
Be blowin bubbles with the boss if I bought one of them...
My daughter gave me a gift voucher at the local hobby world that sells those things, she had the aquarium side of the shop in mind I think.
Might need to add a bit more for a RC like that monster.

[Shaun 4x4]

Yer ive had the little one for ages now but my dog thinks its funny to bite it and try pick it up.
The big one hes not to keen on yet. Just bites the tyres when its stationary. Lol.

Have a look at the traxxas summit 1/10 lipo. Gonna get that one soon.
Its got a hi/low gear box and front amd rear diff lockers. :)

[Shaun 4x4]

traxxas.com/products/models/othermodels/5607Lsummit2012

[Ben-e-boy]

I bought a td42t block, head, crank and cam

It came with a silverctop block, 2 cranks, cam, sump, a zd30 altenator, rd28 starter motor, and a td05h turbo for $500
38511
38510
38509
38508

[lhurley]

Yer ive had the little one for ages now but my dog thinks its funny to bite it and try pick it up.
The big one hes not to keen on yet. Just bites the tyres when its stationary. Lol.

Have a look at the traxxas summit 1/10 lipo. Gonna get that one soon.
Its got a hi/low gear box and front amd rear diff lockers. :)

Is your newby a fuel one??
I've got a summit 1/10, it's freaking awesome. Needs a strip down tho, put it through some mud a little while ago. I've got a vxl rustler that's smashed and a vxl stampede as well. I play hard so they are all in need of work.
I want one of the big fuel traxxas cars, but I don't think I would use it enough.

[Shaun 4x4]

New one is brushless runnins on 6s lipos.

I had a ofna nitro car about a year ago. Will never buy one again.
They are fun and sound cool but heaps more work involved.

Yer my little one is the vxl erevo. Awesome little car. Had it for over a year now and its been used hard. Currantly giving it a birthday.
Got new servo, rear diff and slipper clutch assembly for it.

Is you summit the lipo version?

[lhurley]

New one is brushless runnins on 6s lipos.

I had a ofna nitro car about a year ago. Will never buy one again.
They are fun and sound cool but heaps more work involved.

Yer my little one is the vxl erevo. Awesome little car. Had it for over a year now and its been used hard. Currantly giving it a birthday.
Got new servo, rear diff and slipper clutch assembly for it.

Is you summit the lipo version?

Nah it's the older one. Pretty sure I can run lipo tho. I don't have a lipo charger so I'm in no rush. It still goes pretty hard.

[macca]

Bought one of these today, but for $45 from Repco during the sale ending next week.

http://www.ebay.com.au/itm/Ezy-Wheel-Lifter-Dolly-Heavy-Tyre-Change-4WD-Offroad-/281121953031?pt=AU_Car_Parts_Accessories&hash=item41742c9507

Works quite well, but needs flat solid surface. I was in the shed on concrete so swapping the tyres to the roadies was made easier.

Found your thread TD

[AB]

I actually bought an inferred thermometer to measure the temp in the church earth oven!!!

As soon as the fire bans are lifted I'm a cookin!!!


Sent from my iPhone using Motorculture mobile app

[MEGOMONSTER]

I actually bought an inferred thermometer to measure the temp in the church earth oven!!!

As soon as the fire bans are lifted I'm a cookin!!!


Sent from my iPhone using Motorculture mobile app

What's temps are you expecting.

[AB]

What's temps are you expecting.

They can go up to 500 so I want to make sure I'm not going to pulverise the pizzas or meat...lol


Sent from my iPhone using Motorculture mobile app

[MEGOMONSTER]

They can go up to 500 so I want to make sure I'm not going to pulverise the pizzas or meat...lol


Sent from my iPhone using Motorculture mobile app

You mean disintegrate.

[AB]

You mean disintegrate.

That's a better word for it...lol


Sent from my iPhone using Motorculture mobile app

[MEGOMONSTER]

That's a better word for it...lol


Sent from my iPhone using Motorculture mobile app

My sister in law done to the Christmas Turkey and potatoes a few years back.

Under the turkey skin which was still intact and in shape but as soon as the knife went though, it literally turned to dust and the jacket potatoes were hollow also.
It was the funniest thing I've ever seen.
Thanks his everyone else at Christmas lunch brought lots of food cos we all know she's a bad cook. Lol

[threedogs]

paid for my 12" cast alloy camp oven today cant wait to try it out

in general chat macca

[Ian2011]

A can of expanda foam and some sikaflex to seal up the front firewall bungs, damn NT wet season

[threedogs]

Does get a tad damp up there in the wet, love it.
Received my shoulder mike for my tx 6200 GME hand held
And a head set for my Icom joey Jr

Plus a new leather case and belt clip for the TX6200

[oncedisturbed]

Ordered a new pair of Uniden UHF handhelds with headsets and a Garmin Etrex GPS

[LaurelTurboDiesel]

Egt and boost gauge :thumbup:

[paulyg]

I got a pair of GU2 factory tail lights with the reverse and indicator lights on both sides for $50 at the Ballarat swap meet.

[Hodge]

Bought one of the new Warn Zeon 10-S winches.
40893

[paulyg]

That's a nice looking winch.

[Hodge]

That's a nice looking winch.

Yeh it's their new range to replace the XD9000 and the XP.

[happygu]

Bought one of the new Warn Zeon 10-S winches.
40893

Hodge,

Looks pretty cool.....Will it fit ok in the standard ARB Bar - it looks like it either needs to be mounted upsidedown, so that the WARN Cradle doesn't hit the bar....or modified slightly....

Mic

[mudski]

Got this : http://www.supercheapauto.com.au/online-store/products/SCA-Parts-Washer-60-Litre.aspx?pid=284715#Cross

For $70 brand new. Same brand and all. Bargain!!!

[Hodge]

Hodge,

Looks pretty cool.....Will it fit ok in the standard ARB Bar - it looks like it either needs to be mounted upsidedown, so that the WARN Cradle doesn't hit the bar....or modified slightly....

Mic

If you look at the picture the top of it has the control box somewhat inbuilt. But all that comes off and fits on top of the bar as did the older control boxes. Once the control box is off the winch , it fits nicely inside the bar. Its alloy too , so much lighter .

[threedogs]

@ Hodge very nice

@ Mudski that will be getting a work out, so $$$ well spent

[mudski]

The only issue I have found is that there is a sticker on the pump saying to use water based solvents only. Which I didn't know until I picked it up. Now i just gotta find a decent water based solvent. If theres such a thing

[Hodge]

Another purchase today. The awesome bag.

[threedogs]

40946
Was tempted to buy this camp oven ,but at $140 plus freight forget it

[Hodge]

And another photo of what I bought today. And my son Benjamin doing some quality control on it. Passed. :smiley_thumbs_up:
40947

[mudski]

Haha! Cool pic.

[gaddy]

Shouted the mother in law a trailer load of concrete blend and a few bags of cement ! thought my luck was changing , only to be told I had to lay a shed slab . And could not make her some new shoes ! Foiled again

[Clunk]

40946
Was tempted to buy this camp oven ,but at $140 plus freight forget it
havent you got enough camp ovens already!!!!!???? lol

[MEGOMONSTER]

K&N Filter cleaner and filter oil and spare filter.

[threedogs]

@ Clunk been after an alloy one for ages, only got 8. some have more than that,
very collectable . Selling my Metters number 14 on Ebay soon

I brought an hour hour glass 200mm high

[AB]

Apologies for my absence of late gents. Life is hectic but back on board very soon hopefully...

Anyways finally got a half decent company car and managed to keep it in nissan family!

Old farm ute only done 65k in 20 years....classic...lol

41019


Sent from my iPhone using Motorculture mobile app

[threedogs]

brought some 15mm coil spacers for the front to replace what ever OE rubber was there, ,
It will level out the stance a bit as well

[shan-747]

Just brought a pair of recovery points from 3dogs :)

[threedogs]

Just brought an Aldi sharpening system block 4 different grits , keep your camp and hunting knives sharp

[mudski]

I bought some quick set to give out to some forum members if they need. Lol. Nah I gottém so I can re-do the retaining wall, if you call it that, out the back. Thats all I bought.

[lhurley]

I got my led lenser P7 head light. Holy crap it's impressive. Very bright, fully adjustable beam and brightness. Very very impressed.

[Rickie3]

Yesterday I added an alarm with remote central locking on my 2000 GU and today added a brand new roof basket and roll out awning and a pair of 75W HID driving lights:bowdown: I have just won and bought a Winch Cradle from ebay, pretty sure from a member here:) so that will be my next addition a new winch, I was going to buy a new bullbar but after finding the winch cradle certainly a cheaper way out and besides I do like my alloy bar

[Shaun 4x4]

A 2013 Nissan Navara STX 550

[93patrol]

So why did you go for the nav Shaun . Needed a ute I suppose. Think I read that before some where

[Shaun 4x4]

So why did you go for the nav hodge. Needed a ute I suppose. Think I read that before some where

Nar dont need a ute but handy to have and still wanted 5 seats so had to be a dual cab.

And went the navara over the other dual cabs cause of the v6 diesel and the 7 speed auto.

[Parksy]

Bought a chrome grill to fit to the almost black gq. Will look the goods!

[happygu]

Bought a chrome grill to fit to the almost black gq. Will look the goods!

Have to post a picture of that ... I think that will look pretty neat

[Parksy]

Will do. Just need some good weather to complete the paint job.

[Hodge]

Ran around today, bought and gathered what I think are right size bits for the provent. Just waiting for my intercooler to arrive ( if diesel smart decide to eventually send it ) , and then I'll plug everything up in one go.

41381

[Rickie3]

Today I fitted up my new winch cradle and new winch, Im so happy I can keep my alloy bar, just a slight mod to the bar and it all fitted up and looks brilliant, far cheaper than having to buy a new bar

[HuskyInAuz]

Brown Davis Auxiliary 80L tank, 10 days out for delivery. Icom 440-80 CB.

[mudski]

Large battery box to fit the second battery in my camper. I was looking on fleabay at them, only need a box, no bells and whistles and they seemed to be around the $25 for one delivered. I was doing a job at Ray's today and they had them for $15. Bargain. Now deciding on the battery...

[oncedisturbed]

More clips, studs etc for my leatherworking

[Hodge]

Well bought the other day but finally arrived... Diesel smart IC . will be fitting it and the catch can this weekend.

[Hodge]

New rails and winch and scangauge finally arrived.

4189041891

[Sherro]

New 3 core radiator for my gq.

[BigRAWesty]

Stainless sheet for my new water tank..

Ex work place and boss was away..
Rounded up roughly 2m2 worth of sheet..
Leading hand runs the tape over it, right'o 1m2 there. Walk in the office, price for a square meter of stainless..
$87, right'o so call it 40 for half a square then..

Fark yea... Lol

[HuskyInAuz]

2" AmadaXtreme Stage 2 lift kit with air bags .. 100 watt flexible solar panel. This is a test have to see if it's as good as it sounds and appeared at the caravan show in Melbourne. 12vdc digital volt meter x2, Blue Seas 12vdc power points and one Blue Sea USB twin power point. Received quotes for UFI 16g Large turbo kit and airbox, CSA 16" Monster wheels, Toyo AT tyres and Optima Blue Top 31M battery.

Next week will look at cargo divider, air compressor and draw up aluminum drawers for local shop to fold.

I went to the Melbourne show with 2-3 vendors in mind to visit about various items. One that produced aluminum drawers, kit or DIY. They still have on their website as attending, problem was they were not listed in program and the staff couldn't find them. Called them directly "oh, we're not doing that show this year" !!! OMG GET IT OFF YOUR WEBSITE DEAR !! Scratched them off the vendor list.

[threedogs]

Large battery box to fit the second battery in my camper. I was looking on fleabay at them, only need a box, no bells and whistles and they seemed to be around the $25 for one delivered. I was doing a job at Ray's today and they had them for $15. Bargain. Now deciding on the battery...

Full river do an awesome deep cycle battery with a price to match
but it wont fail you and that's the main thing

@ Husky Brown Davis do a quality Tank I've used them on both my 4x4 since 94
never had an issue ever

[threedogs]

saw these on Ebay and thought they would be handy at camp only $1 each so very cheap,
they remind me of dynamite fuse matches I used years ago up Tom Price

[Clunk]

Just bought a Ridge Ryder Ultimate air compressor from supercrap on special for $168, also some 2 stroke to add to the diesel. Will see how it goes tomorrow.

[Hodge]

Excellent buy clunk. Family friend took a chance and put one in his pajero. Went to simo, wa then back through the bite. 3 cars in convoy . his mates tjm compressor called it quits after 12 tire pumps. The rest of the trip his rydge rider kept all 3,cars inflated. Countless duty cycles and still going strong after 2 months on the road.

Edit: Just trying to say that sometimes, only sometimes, cheaper isnt bad.

[lhurley]

Excellent buy clunk. Family friend took a chance and put one in his pajero. Went to simo, wa then back through the bite. 3 cars in convoy . his mates tjm compressor called it quits after 12 tire pumps. The rest of the trip his rydge rider kept all 3,cars inflated. Countless duty cycles and still going strong after 2 months on the road.

Edit: Just trying to say that sometimes, only sometimes, cheaper isnt bad.

They are a great compressor, but they do have a limited life. Mine was great for 12 months, now it wouldn't inflate a baloon.

[Clunk]

Excellent buy clunk. Family friend took a chance and put one in his pajero. Went to simo, wa then back through the bite. 3 cars in convoy . his mates tjm compressor called it quits after 12 tire pumps. The rest of the trip his rydge rider kept all 3,cars inflated. Countless duty cycles and still going strong after 2 months on the road.

Edit: Just trying to say that sometimes, only sometimes, cheaper isnt bad.

Exactly, I've still got my $100 elcheapo no brand compressor, still works after 5 years, it's just a little slow now lol....... Thought I'd upgrade

[Drewboyaus]

I've got $100 voucher for BCF to spend......

[growler2058]

12x 125gn single bevel outback supreme broadheads

http://outbackbroadheads.com.au/wp-content/uploads/2012/07/2012_05052010Pics0007-300x225.jpg (http://outbackbroadheads.com.au/wp-content/uploads/2012/07/2012_05052010Pics0007.jpg)

[MudRunnerTD]

A 52" LED Light bar off eBay for under $50 delivered Brand New!!!!!!!! Hell yeah!

[mudski]

A 52" LED Light bar off eBay for under $50 delivered Brand New!!!!!!!! Hell yeah!

Hehe funny about that I did too.

[TPC]

A 52" LED Light bar off eBay for under $50 delivered Brand New!!!!!!!! Hell yeah!


Hehe funny about that I did too.

Me too, but I think we may be posting in the angry thread soon about the same thing.

[Maxhead]

Bought one of these yesterday...bloody bargain
Rayburn No3
41934

[growler2058]

Bought one of these yesterday...bloody bargain
Rayburn No3
41934

Shit hot! How much? Would great out on a little hunting lodge!


Sent from my iPhone using Motorculture mobile app

[threedogs]

They are great ovens for roasts , I have a planet number 2,, even have the original hot plate tool
I'll grab a pic when its brighter, Paid $200 from Ebay
That one looks brand new, always wondered what that thing on the top did, plate warmer???

[Maxhead]

Shit hot! How much? Would great out on a little hunting lodge!


Sent from my iPhone using Motorculture mobile app
Hahaha, yep it would look great there:)

$200 and its very good nick, all I need to do is re-cement the fire bricks back in...Pretty good I thought considering they go for anything upto $5000

[Maxhead]

That one looks brand new, always wondered what that thing on the top did, plate warmer???

I think its to cover the hotplates so it doesn't radiate the heat too much...In summer it will be on and off in winter...LOL

[threedogs]

air -set is cheap is it a Modern one can't remember seeing fire bricks in the old 1940s ovens
great buy BTW

[Maxhead]

air -set is cheap is it a Modern one can't remember seeing fire bricks in the old 1940s ovens
great buy BTW

Yeah the air-set cement is cheap. I think here are 8 fire bricks in this model. The water jacket has a split in it but that is easily fixed if we decide to run hot water out of it.

This is the model http://rayburncookers.com.au/identifymodel3.html

[threedogs]

Heres mine ,all I did was pop some alloy checker plate to each end as it wont be bricked in
for $200 with the water jacket you cant go wrong. need to hunt around for some old tin loaf tins
and bake some fresh bed on the weekends,

[the godfather]

I bought a new Engel.
60 litre fridge freezer.
My boss cocked up and we got stuck with them so I got it for $935.00 brand new.
I think this is a good price.

[Clunk]

Bought a Waeco CFX50 came with bag and other bits n pieces from the Perth caravan & camping show this arvo.

[DX grunt]

What did I buy today? ........... a carton of Carlton Dry (low carb.. lol)

[Woof]

Just retirement home on wheels

[growler2058]

Just retirement home on wheels

More info dogman :)


Sent from my iPhone using Motorculture mobile app

[Paule]

I ordered the twin gauge pillar pod from fleebay.

[Clunk]

More info dogman :)


Sent from my iPhone using Motorculture mobile app

It was one of these mate

42224

Bwahahahaha

[Woof]

More info dogman :)


Sent from my iPhone using Motorculture mobile app
One of these mate, but not at that price...lol
http://www.marketdirectcampertrailers.com.au/en/voyager-rf/

[fracster]

I bought one of these:

http://www.trailcampro.com/2013bushnelltrophycamhdreview.aspx

[growler2058]

One of these mate, but not at that price...lol
http://www.marketdirectcampertrailers.com.au/en/voyager-rf/

Link won't work for me on the phone :(
I'll fire the pooter up an have a look


Sent from my iPhone using Motorculture mobile app

[growler2058]

I bought one of these:

http://www.trailcampro.com/2013bushnelltrophycamhdreview.aspx

Nice. For hunting?


Sent from my iPhone using Motorculture mobile app

[threedogs]

One of these mate, but not at that price...lol
http://www.marketdirectcampertrailers.com.au/en/voyager-rf/

looks similar to Sharons camper , very nice

[growler2058]

One of these mate, but not at that price...lol
http://www.marketdirectcampertrailers.com.au/en/voyager-rf/

That looks the ducks guts mate well done!

[Sir Roofy]

one of these mate, but not at that price...lol
http://www.marketdirectcampertrailers.com.au/en/voyager-rf/

very nice wonder if we will see it in the vic high cuontry

[paulyg]

Rays outdoors had a 20% of sale, got a pair of Maxtrax for $239.

[Stropp]

Went to the caravan show and didn't buy a thing as I'm trying to get the troll finished off for the simo trip.

[Avo]

Went to the caravan show and didn't buy a thing as I'm trying to get the troll finished off for the simo trip.

It pays to be THRIFTY...lol..to much TV..

[fracster]

Nice. For hunting?


Sent from my iPhone using Motorculture mobile app

No mate, for videoing badgers and otters.

[Hodge]

Picked up these before. Hope they're the right ones.

Spoke too early they're wrong ones. LOL

[Stropp]

picked up 2 Hankook 33x17 AT's for a really good price $363 the pair brand new :) they are trying to clear the warehouse before moving at the end of the month.

[Pokey]

Fitting this up as we speak :)42318

[Punderhead]

Lunch

Cheers

[AB]

42335

Finally got a cargo barrier!!!


Sent from my iPhone using Motorculture mobile app

[Winnie]

That looks new and expensive

[Sir Roofy]

42335

finally got a cargo barrier!!!


Sent from my iphone using motorculture mobile app

and my good man how long will it be before it gets installed ?seeing as the sub tank and parts
have,nt moved for awhile think you better call for a working be to help put it together and pizza afterwards

[growler2058]

These rocked up today
42337


Sent from my iPhone using Motorculture mobile app


Edit: gave myself a little cut getting them outta the wrapping :(

[AB]

and my good man how long will it be before it gets installed ?seeing as the sub tank and parts
have,nt moved for awhile think you better call for a working be to help put it together and pizza afterwards

I know I'm sick of looking at all these things I need to do Roofy..lol

My time is just crazy limited at the moment!!!


Sent from my iPhone using Motorculture mobile app

[Sir Roofy]

these rocked up today
42337


sent from my iphone using motorculture mobile app


edit: Gave myself a little cut getting them outta the wrapping :(

well chilly boy what do do with them throw them at your game lol

[Sir Roofy]

i know i'm sick of looking at all these things i need to do roofy..lol

my time is just crazy limited at the moment!!!


Sent from my iphone using motorculture mobile app

been there done that over the years but thats what is great about this forum mate
you just need to ask quick before the arrival or a week after

[growler2058]

well chilly boy what do do with them throw them at your game lol

Yep ;)............................

[TPC]

well chilly boy what do do with them throw them at your game lol
No, he is going to eat a scorpion chilli and shoot them out his ass.

[AB]

been there done that over the years but thats what is great about this forum mate
you just need to ask quick before the arrival or a week after

Ill be right old mate, once this pops out ill either fall in a heap or have time to enjoy the finer things in life...lol


Sent from my iPhone using Motorculture mobile app

[Sir Roofy]

no, he is going to eat a scorpion chilli and shoot them out his ass.

lmfao didnt think of that

[threedogs]

Thought I'd buy an infra red heat gun,

http://www.ebay.com.au/itm/NON-CONTACT-IR-LASER-TEMPERATURE-GUN-INFRARED-DIGITAL-THERMOMETER-SIGHT-HANDHELD-/130909149401?pt=LH_DefaultDomain_0&hash=item1e7acb18d9

Can see it having fun on how hot the coals of a fire are,
how hot tyres get and most important the out side temp of a camp oven
Will let you know how accurate it is

[Pokey]

Bought a Scotts Rods 3 inch exhaust today :D

[BigRAWesty]

Might have scored a 70 pound compound bow..
Needs a string.

Cost, a 6 pack..

[Clunk]

Ill be right old mate, once this pops out ill either fall in a heap or have time to enjoy the finer things in life...lol

Sent from my iPhone using Motorculture mobile app

You won't even have time to fall in a heap mate...... Just wait until #3 comes along Bwahahahaha

Sent from my GT-I9505 using Forum Runner

[threedogs]

[QUOTE=Westy's Accessories;493480]Might have scored a 70 pound compound bow..
Needs a string.

Nice pick up, all I can say is PM oncedisturbed for an arm guard and never ever dry fire it.
it ruins the bow and makes a mess of your arm,

[BigRAWesty]

[QUOTE=Westy's Accessories;493480]Might have scored a 70 pound compound bow..
Needs a string.

Nice pick up, all I can say is PM oncedisturbed for an arm guard and never ever dry fire it.
it ruins the bow and makes a mess of your arm,

Might have to..

Yea was talking about with work mates this arvo, one bloke still has the scares from dry firing... Lil

[megatexture]

Just bought a Bosch laser measure good for 100m if you have a steady hand lmao even Bluetooth the figures to my phone its a little ripper 25000 measurements per charge beats a bloody tape measure!

[megatexture]

Might have scored a 70 pound compound bow..
Needs a string.

Nice pick up, all I can say is PM oncedisturbed for an arm guard and never ever dry fire it.
it ruins the bow and makes a mess of your arm,



Might have to..

Yea was talking about with work mates this arvo, one bloke still has the scares from dry firing... Lil

I think you would like a bow kallen just go to your local shop and they will let you try some out its like 4 wheeling, its addictive. My next thing will be getting a gun licence! Can't wait

[elmo4eva]

Bottom end main bearings a new high pressure head waterpump vrs kit gasket goo acid diped block rwady for rebuild

[threedogs]

I brought a stainless steel bucket for camp, during the day it can keep the shrimp alive,
at meal times it can sit on the fire for washing up water, just need to remove the red plastic handle
And the price $10 norm RRP $18 on ebay plus $8 post so very happy indeed

[Harps]

bought a new head unit and reverse camera can actually see out the back now

[BigRAWesty]

Had a little eBay sesh last night..

200 A shunt and gauge
$20
http://www.ebay.com.au/itm/Digital-Ammeter-DC-200V-200-Blue-Red-LED-Ampere-Meter-Voltage-Panel-Shunt-/331154948008


A volt meter
$2.30
http://www.ebay.com.au/itm/NEW-4-5-30V-Digital-MiNi-LED-Car-Truck-Voltmeter-Gauge-Voltage-Volt-Panel-Meter-/261110214343

And some momentary switches
$5.50 for 10
http://www.ebay.com.au/itm/10-Pcs-Momentary-Action-SPST-Round-Red-Push-Button-Switch-AC-125V-3A-/271436268363

[threedogs]

@ Kallen just brought the same gauge , idea is hopefully it will fit somewhere I can see it,
ATM I have a square one wire into ignition and sit in front on the speedo cluster with d/s tape

[Ben-e-boy]

Superflex swaybars......:D

[Yendor]

Superflex swaybars......:D

I was looking at those kits last night. Do you think there's any advantage in fitting them to a GU with 2inch OME suspension?.

[Ben-e-boy]

Dunno. They are longer and thicker so the effort required to twist them would be similar to stock, I would check the difference between your swaybar on and off and if there is on minor difference in travel I probably wouldnt bother

[BigRAWesty]

@ Kallen just brought the same gauge , idea is hopefully it will fit somewhere I can see it,
ATM I have a square one wire into ignition and sit in front on the speedo cluster with d/s tape

The shunt or the voltage gauge.
I really don't know why I bought the gauge, the shunt does it all..

Was a little under the influence last night..
Home brew turkey and honey... Smooth as..

[Clunk]

Had a 30% off voucher from anaconda, so bought a fridge slide

[threedogs]

got myself a great underwater torch very impressed with it.
Even has a belt cutter on the side

[Cuppa]

After years of tangling & untangling air hose I got myself one of these.

[TPC]

After years of tangling & untangling air hose I got myself one of these.
Been thinking of getting one of those, what did it cost?

[Cuppa]

$176 delivered (Ebay). 20m of hose & a 2m hose to connect between compressor & reel. There are cheaper (& more expensive) but I like Jamec Pem gear. I have found it very reliable over the years, unlike some of the cheapie stuff.

[doka404]

Well I didn't buy it today it was Monday. But just bought a GQ TD42 SWB Safari :)

[oncedisturbed]

Bought a new lil gas cooker at Bunnings, slightly smaller in size and the case is smaller than most but it came with its own hotplate, means i can take the frying pan out of the drawers
43195

[lucus30]

Bought a new lil gas cooker at Bunnings, slightly smaller in size and the case is smaller than most but it came with its own hotplate, means i can take the frying pan out of the drawers
43195

Nice I bought a similar one but a double burner. Mine is one of those ubute BBQ things. You will love it I'm sure

[BigRAWesty]

Bought 2 small fold up alloy tables, use em as kids tables for dinner, then drinks tables for us..

[oncedisturbed]

Nice I bought a similar one but a double burner. Mine is one of those ubute BBQ things. You will love it I'm sure

I have the same ubute 1 and a Spinifex version as well, got this as it is smaller


Sent from my iPhone using Motorculture mobile app

[DX grunt]

Forgot to mention it, but a while ago, I had a child restraint anchor point fitted to my ute, as that particular model was eligible.

Got it done at Vanquip in Welshpool and they put a modification plate in the engine bay and registered it with the Dept of Transport.

Cost $185, but well worth it - and legal. lol

[Maxhead]

I bought myself "SLASH". Lol

A small tractor for me block. It is a Kubota L295 with slasher, grader blade, single and double plough and a stick rake.

Its only a 2wd model but it will suit my needs.


43209

[Winnie]

Fancy ride on mower that one!

[menace 2]

bought a compressor..thought for the price may as well have a look and see if it is a throw away


43210

[threedogs]

[QUOTE=menace 2;498040]bought a compressor..thought for the price may as well have a look and see if it is a throw away
I brought the single headed pump and the thermo cut out half way through the first tyre, hope yours is better,but I have a few.

Brought myself a Ghillie stove, can boil water any time you like very happy,,,,,,,,,,,,

[menace 2]

Thaaannks !!!!....lololololololol

[DX grunt]

I bought myself "SLASH". Lol

A small tractor for me block. It is a Kubota L295 with slasher, grader blade, single and double plough and a stick rake.

Its only a 2wd model but it will suit my needs.


43209

Yeah, that'll get your Q out of most situations on your block. hahahaha

Your tractor and Doggie's Suzuki are a pigeon pair. lol

[growler2058]

I bought myself "SLASH". Lol

A small tractor for me block. It is a Kubota L295 with slasher, grader blade, single and double plough and a stick rake.

Its only a 2wd model but it will suit my needs.


43209

http://static.tvgcdn.net/MediaBin/Galleries/Imported/ShowPix/Jonathan/imagesA_M/beverly-hillbillies.jpg NeK MINNIT!! BWahahahahahahaha

[BigRAWesty]

I bought myself "SLASH". Lol

A small tractor for me block. It is a Kubota L295 with slasher, grader blade, single and double plough and a stick rake.

Its only a 2wd model but it will suit my needs.

<img src="http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=43209"/>

Where's the bucket for track building???

[threedogs]

also brought some of these cheap enough to keep a few in different places

[Maxhead]

Where's the bucket for track building???


Once I figure out where I'm ganna put it and when Ben e Boy designs it, I will find one mate..LOL

[Fry]

bought a compressor..thought for the price may as well have a look and see if it is a throw away


43210

Me mate and I both have one and the only issue so far is that both our switches have busted. so we just direct wired them.

[menace 2]

well that sounds better...cheers Ive heard they call theedogs passion fingers anyway ...lololol

[threedogs]

Small digital volt meter has arrived, now to find a spot to mount it.
size wise its about the same size as a locker switch, maybe a tad bigger.
think I might mount it to the right of the radio as that facia plate has nothing behind it,
there goes the "no drill" policy out the window,

Edit:: just went and tried it , looks like it needs to go on the LHS under the LED light bar switch

[Winnie]

there goes the "no drill" policy out the window,

Wouldn't that have flown out the window when you got the snorkel put on?

[threedogs]

yeah sort of the care factor is getting lower lol

[Winnie]

Haha.
I ordered new drivers door hinges and Superior unbreakable engine mounts. I've gone through 2 new engine mounts in under 6 months so gone with the Superiors.

[threedogs]

sounds like a wise move

[BigRAWesty]

Small digital volt meter has arrived, now to find a spot to mount it.
size wise its about the same size as a locker switch, maybe a tad bigger.
think I might mount it to the right of the radio as that facia plate has nothing behind it,
there goes the "no drill" policy out the window,

Edit:: just went and tried it , looks like it needs to go on the LHS under the LED light bar switch

Nice. Won't be fitting mine before I leave..

[sooty_10]

I received my digital temp controller today :) Now I just have to find time to cut a hole in the front of my drawers to mount it in and setup a plug for the temp probe. Engel will finally be temp controlled.

http://www.ebay.com.au/itm/161228922459?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

[Hodge]

Just go some xc-xb falcon heater hose as suggested for the catch can. One flared end. The bloke asked what year, engine size falcon, I said no idea, and when he showed me this one for example it looked right. Then I told him what my purpose for it is, and he said, I'll be changing it in a months time since oil will degraded it big time. So we'll see....
43326

[AB]

Just picked up a travel buddy off eBay for only $150!!!!