-
27th April 2021, 12:49 PM
#1
Turbo waste gate
Hi all have got the beast back together Head, water pump, fuel pump ,Injectors, Radiator, Belts ,
Now …. what sort of circlip is on the waste gate of the turbo charger ? I have made an adjustable link . But in the process
Lost the circlip . grrrr Its been a big job started at Christmas. and its just going now fit a few more bits and then off to have it tuned .
I hope it pays off . Exhaust, front mount intercooler , Air bags . just about done
-
-
27th April 2021 12:49 PM
# ADS
Circuit advertisement
-
28th April 2021, 09:53 AM
#2
Expert
Could you use a bit of tie-wire in the absence of the circlip?
That's my usual "go to" stuff
-
-
28th April 2021, 10:27 AM
#3
Yes that is what I have ATM .
I think I removed a fancy clip AND now I cant find it !!! I think the workshop elves may have it .. .
-
-
28th April 2021, 02:04 PM
#4
The master farter
-
-
28th April 2021, 03:57 PM
#5
Factory turbo with a different set of bits inside !!
-
The Following User Says Thank You to Tip12345 For This Useful Post: