-
28th January 2017, 04:12 PM
#1
How have you secured your slip off pod to your tray ,.
How have you secured your slip off pod to your tray guys as I'm in the process of setting mine up and wondered what you guys did. Pic's would be the go to save on typing over to you .
U have 4 choices in life :U can like it; lump it; love it or shove it, take your pick and stick to it !
-
-
28th January 2017 04:12 PM
# ADS
Circuit advertisement
-
28th January 2017, 05:28 PM
#2
Rotaredom
I don't have one but it really would depend on how frequently you were removing it. I've never taken notice 2 how our jack on / off canopies get installed just know the normal canopies are just bolted down with a square gal washer each side.
I'll ask at work on Monday what they normally do
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following User Says Thank You to NissanGQ4.2 For This Useful Post:
dads tractor (30th January 2017)
-
28th January 2017, 05:56 PM
#3
Thanks mate dont want to bolt through floor so was wondering about a system to under the tray . Keep in mind this will not be on nice concrete drive ways just as a added challenge aye .
The ideal would be camlocks like on trucks but too big .
U have 4 choices in life :U can like it; lump it; love it or shove it, take your pick and stick to it !
-
-
28th January 2017, 05:59 PM
#4
I just bolt both my work canopy and camper down through the tray - only takes a few minutes with a cordless impact driver to undo the bolts. I don't use captive or welded on nuts under the tray because I use my ute as a ute a regularly and think that the threads would either corrode or get full of gunk. I just use a flat and a spring washer. Never had any dramas. Incidentally when getting the wind down legs make sure to offset the "coupling" so as to increase stability and allow the doors to open when off the ute. I had my brother modify both of mine ( he can weld )Securing 011.JPGSecuring 002.jpgSecuring 004.jpgSecuring 005.jpg
Remember that a high IQ doesn't make up for a lack of common sense.
Learn from the mistakes of others - you won't live long enough to make them all yourself !
-
The Following 2 Users Say Thank You to Old Wal For This Useful Post:
dads tractor (28th January 2017), MB (31st January 2017)
-
28th January 2017, 07:43 PM
#5
Patrol God
over centre catches similar to a rear wheel carrier but smaller would work.
I think they have a rating stamped on them
http://www.ebay.com.au/itm/Trailer-O...2tc4RGcUD7xqlw
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
The Following 2 Users Say Thank You to threedogs For This Useful Post:
dads tractor (28th January 2017), MB (31st January 2017)
-
30th January 2017, 08:15 PM
#6
What did u find out mate NissanGQ4-2
U have 4 choices in life :U can like it; lump it; love it or shove it, take your pick and stick to it !
-
-
31st January 2017, 05:27 PM
#7
Rotaredom
Originally Posted by
dads tractor
What did u find out mate NissanGQ4-2
Normally bolt them mate, you could use catches but believe they aren't as strong as bolting them and with a pod loaded up with weight why risk it considering it would only take a few mins to bolt on / off.
Any reason you don't want 2 bolt down???
Last edited by NissanGQ4.2; 1st February 2017 at 04:08 PM.
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following User Says Thank You to NissanGQ4.2 For This Useful Post:
dads tractor (31st January 2017)
-
31st January 2017, 07:23 PM
#8
Patrol Guru
I spoke with a Pod builder over here in WA and they have some sort of fast latch system but it costs extra otherwise they bolt them down.
2004 4.2TDi GU ST Ute, 3" Exhaust, UHF, Lightforce Spotties, BFG All Terrains, Steel Winchbar, Winch, Dual Batts, CC Ultimate IC, 4" Snorkel, XLR8 Steps and Scrub bar
-
The Following User Says Thank You to gubigfish For This Useful Post:
dads tractor (31st January 2017)
-
31st January 2017, 07:35 PM
#9
.........
-
The Following 2 Users Say Thank You to MB For This Useful Post:
dads tractor (31st January 2017), threedogs (1st February 2017)
-
31st January 2017, 08:38 PM
#10
OK thanks for everyone's input ; why dont I want to use bolts through the tray because when I unload at no cement to jack on camp with no one in sight it's a bit hard to secure the pod back on and move it to get bolts back in .
U have 4 choices in life :U can like it; lump it; love it or shove it, take your pick and stick to it !
-
The Following 2 Users Say Thank You to dads tractor For This Useful Post:
MB (31st January 2017), NissanGQ4.2 (1st February 2017)