Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
To suit GU Patrol with the 3Ltr Direct Injection motor. Please check if this is the right instructions, DP#34, for your chip prior to using. Tuning1.pdf tuning2.pdf coverback.pdf cover.pdf wiring diagram.pdf This wiring diagram if for a 2001 Y61. ST model with manual trans and no dual zone air or ABS. As there will be a difference.
If theres a better way to put these pdf's on here, let me know...
Last edited by mudski; 4th March 2015 at 06:19 PM.
Hi Mudski, one way to put them in your post is like this.
First convert or save the files as .jpg rather than .pdf.
Second use the ‘insert image’ function
this brings up a box allowing you to select an image off the ’net or off your computer. The select off your computer doesn’t work for me, but if you click ‘Basic uploader’ that works. I’m not sure how it’s possible to have the image embedded in the post without the additional ’thumbnail attachment’ showing too.
Cuppa
2006 4.2TDi ex-Telstra Remote area Camper. 425w roof mounted solar, 360Ah Aux batts, BCDC1240, Onboard hot & cold pressurised & filtered water, (25 litre hot water calorifier), ARB fridge, ARB freezer, Built in kitchen, heaps of easy access storage, 240v, 3” Genie exhaust + dynotune, 2” lift, 3900kg GVM upgrade, second glovebox, ROH Blaktrak steel wheels, Bridgestone D697's (now Toyo RT's), Redarc gauges/pillarpod, Hema HX-1, Icom 450 CB, dual rear view cameras, Onboard 30amp Victron mains charger, second glovebox, dual seat conversion, TPMS, Boss PX7 onboard air with 9 litre tank, 350w inverter, Steel bullbar, Harrop Eaton diff lock (front), Warn winch, Snorkel, Dual spares , 160 litre water tank, 180 litre fuel in two tanks (approx 1200km range) 2010 Tvan Tanami. (incl another 70 litre water tank) with matching wheels/tyres (& 3rd spare) A Nomadic Life (Blog)
Mark you are a champion mate. I knew you had posted this up before because i had seen it about 9 mnths ago. i was up until all hrs searching the forum until I found it. So thank you very much for finding the information again, and posting it up here. P.S I got your old thread back up and it was very easy to print off in one hit. Thanks again
03 ST-L auto, Dawes and needle valve, provent catch can, 3' exhaust. I want more than I got
Ok so I've just had a quick look at how to install this chip and I'm wondering how you guys went about connecting it to the pump. I can only see about 10mm of cable where it's meant to connect too. Did you just solder it on there or is there some special adaptor you used? Thanks
03 ST-L auto, Dawes and needle valve, provent catch can, 3' exhaust. I want more than I got