-
12th November 2014, 09:29 PM
#11
Would be a good spot but i've gotta replace the intercooler soon. It's already leaking.
-
-
12th November 2014 09:29 PM
# ADS
Circuit advertisement
-
13th November 2014, 09:41 AM
#12
Patrol Freak
Most after market intercoolers come with a fitting point for a boost gauge.
-
-
13th November 2014, 10:29 AM
#13
The master farter
Originally Posted by
TazManiac
Would be a good spot but i've gotta replace the intercooler soon. It's already leaking.
I have two on the pipe coming out of the intercooler at the front of the motor.
Originally Posted by
BillsGU
Most after market intercoolers come with a fitting point for a boost gauge.
Yeah some do actually. But not all. My aftermarket IC didn't. But it was a cheapy anyhow. Under $400. If the OP's car is the 3Ltr and he has a Dawes fitted, and if the IC he buys has the port already in the IC he can use this...
http://www.ebay.com.au/itm/Branch-Te...item35d674903e
So one end is for the Dawes and the other for the gauge. If the gauge is mechanical that is. Mine is not, it uses an electronic sensor, so I have two separate ports, one for the sensor and one for the Dawes.
-
-
13th November 2014, 12:35 PM
#14
My gauge is mechanical so I think I will just use the one bung and t off the boost line of the dawes for the boost gauge when I get the dawes installed.
-