-
3rd February 2014, 10:36 AM
#11
Expert
Originally Posted by
threedogs
No the heat from the genset we were talking about
Yeah was gunna put the vent/fan in the esky lid. Still work in progress. Only started yesterday
-
-
3rd February 2014 10:36 AM
# ADS
Circuit advertisement
-
3rd February 2014, 10:39 AM
#12
Patrol God
Looking good and you'll still have airflow over the genset as well.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
The Following User Says Thank You to threedogs For This Useful Post:
-
3rd February 2014, 10:42 AM
#13
Expert
Will be fuelling it externally as well with one of these for much longer running times.
ImageUploadedByMotorculture1391386355.622588.jpg
-
-
3rd February 2014, 10:48 AM
#14
Patrol God
too bad you can't use stainless steel braided fuel line.
never cut that stuff
Be nice if you could bring the airfilter to the outside
of the ice box somehow, don't want to be sucking hot air
Last edited by threedogs; 3rd February 2014 at 10:51 AM.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
The Following User Says Thank You to threedogs For This Useful Post:
-
3rd February 2014, 10:53 AM
#15
Expert
Originally Posted by
threedogs
too bad you can't use stainless steel braided fuel line.
never cut that stuff
Be nice if you could bring the airfilter to the outside
of the ice box somehow, don't want to be sucking hot air
Prob can mate.
-
-
3rd February 2014, 10:54 AM
#16
Expert
Originally Posted by
threedogs
too bad you can't use stainless steel braided fuel line.
never cut that stuff
Be nice if you could bring the airfilter to the outside
of the ice box somehow, don't want to be sucking hot air
Well with side cover off the genny it's coping all the fresh air right on side
-
-
3rd February 2014, 11:09 AM
#17
Patrol God
can only try it and see what temps it generates inside the box
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
4th February 2014, 09:03 PM
#18
-
The Following User Says Thank You to Mitch20b For This Useful Post:
-
4th February 2014, 09:06 PM
#19
Expert
Originally Posted by
Mitch20b
That's a great idea
Thanks mate. Don't rush off and build one yet. Once I fit the exhaust shroud I'll do some extensive testing in relation to temp etc.
Will post results here.
Marty.
-
The Following User Says Thank You to rafa For This Useful Post:
Stropp (4th February 2014)
-
15th February 2014, 08:43 PM
#20
Expert
-