-
19th September 2013, 06:49 PM
#1
Advanced
Constant Check light Unable to read codes
Hi all
My Engine check light is on and im unable to get flash codes and tried to aftermarket scan tools with no luck..... Could I be locking at a faulty ecu? It Runs Fine and not in limp mode any help would b great. Ohh I might add the my oil pressure switch has been playing up don't know if this has any thing to do with the above fault
Thank Ryan
Last edited by MudRunnerTD; 19th September 2013 at 06:57 PM.
Reason: Fixed title for you
-
-
19th September 2013 06:49 PM
# ADS
Circuit advertisement
-
19th September 2013, 07:03 PM
#2
What vehicle and engine do you have?
If it's a diesel have you tried replacing the fuel filter? or at least drain it and check for water in the fuel.
Highly doubt it's a faulty ECU.
-
The Following 2 Users Say Thank You to Yendor For This Useful Post:
MudRunnerTD (19th September 2013), Nvd323 (19th September 2013)
-
19th September 2013, 07:27 PM
#3
Advanced
Yendor u legend! Y does Nissan not have a water light lol. Cheers Mate
-
-
19th September 2013, 07:30 PM
#4
Moderator
Originally Posted by
Nvd323
Yendor u legend! Cheers Mate
Yes he is!!!
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-