-
23rd January 2013, 06:51 AM
#1
Narva wiring harness
I would like to install the relay for a new harness in the relay box near the battery. I have tried to pry the wiring out of the cup that fits on to the relay to slip it underneath the fuse box without damaging the components. Is there an easy way to do this ? Or should I just cut the wiring and rejoin ?
Regards
Jock
-
-
23rd January 2013 06:51 AM
# ADS
Circuit advertisement
-
23rd January 2013, 09:47 AM
#2
Hi Jock,
At the risk of asking a stupid question, why not just leave the relay outside of the factory relay box? I know it will be neater etc, but an after market relay hanging off one of the factory bolts down the inside of the engine bay looks pretty neat.
Personally that's how I have done it in many cars and I consider myself somewhat anal when it comes to neat wiring..
-
The Following User Says Thank You to bm0 For This Useful Post:
-
23rd January 2013, 04:09 PM
#3
bm0 thanks, I would also like to shorten the harness and remove the polarity switch. Maybe I'm being to picky !! Cheers
-