-
26th July 2012, 05:35 PM
#11
Advanced
bottom end pulled off and all bearings reported to be in A1 condition. Now saying "yep it the tappets that need replacing" sure this is what I said when I took it in, jesus. Now going to set me back 1500 bucks due to work done today and to have them fixed. So annoying this rubbish.
-
-
26th July 2012 05:35 PM
# ADS
Circuit advertisement
-
26th July 2012, 05:52 PM
#12
Patrol God
Costly but at least its all sorted now for years of trouble free 4x4ing
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
The Following User Says Thank You to threedogs For This Useful Post:
GQ snail (26th July 2012)
-
26th July 2012, 05:59 PM
#13
Patrol Guru
Originally Posted by
GQ snail
bottom end pulled off and all bearings reported to be in A1 condition. Now saying "yep it the tappets that need replacing" sure this is what I said when I took it in, jesus. Now going to set me back 1500 bucks due to work done today and to have them fixed. So annoying this rubbish.
You meant the rocker arm? Could be but my rocker arm on the old engine were in pretty bad condition, badly scored on the face where they in touch with the valve but it didn't produce any ticking sound.
Hope you found the problem soon..
-
-
26th July 2012, 06:21 PM
#14
Originally Posted by
GQ snail
bottom end pulled off and all bearings reported to be in A1 condition. Now saying "yep it the tappets that need replacing" sure this is what I said when I took it in, jesus. Now going to set me back 1500 bucks due to work done today and to have them fixed. So annoying this rubbish.
Nothing worse then piss poor mechanics playing the guessing game at the customers expense.
-
-
31st July 2012, 04:03 PM
#15
Advanced
So the lifters have not been replaced like the mech wanted to, I got him to do a oil pressure check with a master gauge, turns out the snail running zero pressure, this would make any hydrolic lifter tick, so new oil pump ordered and install happening tomorrow. Fingers crossed this is the final chapter and I will be back on the trails this weekend.
-
-
31st July 2012, 05:11 PM
#16
Hardcore
Find a new mechanic this guy sounds like a joke
-
The Following User Says Thank You to healy For This Useful Post:
GQ snail (31st July 2012)
-
31st July 2012, 06:00 PM
#17
Patrol God
Hope you're not paying for his thinking time?
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
31st July 2012, 07:07 PM
#18
I think the ticking is coming from a rock in your tyre lets just replace them all and see if it works.
I recall your other thread asking you about the oil pressure and you responded.
http://www.nissanpatrol.com.au/forum...Smoke-and-Tick.
Yeah engine has had really good run. Oil pressure is spot on.
Are you sure your mechanic put the oil pickup back in when the done the big ends lol
Last edited by 97_gq_lwb; 31st July 2012 at 07:14 PM.
-
-
31st July 2012, 09:43 PM
#19
Patrol God
bring it round and ill have a look at it for you for free hell i could even come to you pm me if interested.
-
-
31st July 2012, 10:07 PM
#20
Patrol Guru
Originally Posted by
nissannewby
bring it round and ill have a look at it for you for free hell i could even come to you pm me if interested.
good onya Nissannewby, this forum still works well
-
The Following User Says Thank You to Morton For This Useful Post:
nissannewby (31st July 2012)