Custom GU Rear Draws (With Interior Lights)

[Alan GQpatrol]

awesome looking drawers would love some measurments aswel.

[bigcruzer]

They look great! I am about to embark on a build of my own, so I can only hope they turn out as good as yours have! Love the idea of the LED lights in the drawers on the pressure switch, so might attempt that too!

[Lewy]

WOW they look great!!!! Yes please could you post up the plans :-)

Cheers Lewy

[Rosco]

Haha well I just hope they come up ok, tonight is pretty much my first time using a circular saw.

Just a tip for you for cutting sheets straight.
You can clamp the box tube got for the runners to the sheet at the set back of the saw and run the saw along the edge of the tube to get the cut straight. Bit of setting up but a perfect cut.

Looks good and a great job also.

Great idea with the lights.

[Drew]

Damn nice job.

[Rip'n'Shred]

Great job, looks awesome

[brooks]

They look awesome if you don't mind will be using the light idea and some of the other ideas to make my own when I eventually get around to making mine.

[bigcruzer]

Hey Fletch just wondering if you have any pics of how you attached the drawers to the car! I know in an earlier post you said you were going to use an angle to the 3rd row seat bolts, just wondering if you had a pic. Thanks Ben

[boosh]

Awesome drawers! Def gonna look here when I g to build mine!

[NP99]

Just a tip for you for cutting sheets straight.
You can clamp the box tube got for the runners to the sheet at the set back of the saw and run the saw along the edge of the tube to get the cut straight. Bit of setting up but a perfect cut.

Looks good and a great job also.

Great idea with the lights.

And a 40 tooth blade helps.

How have the draws stood up to time and travel mate?