-
18th May 2024, 03:37 AM
#5671
Patrol Guru
So the Y62 has front hydraulic height adjustment from factory but not rear?
-
-
18th May 2024 03:37 AM
# ADS
Circuit advertisement
-
18th May 2024, 12:52 PM
#5672
Moderator
Originally Posted by
BrazilianY60
So the Y62 has front hydraulic height adjustment from factory but not rear?
No ir had HBMC Hydraulic Body Motion Control that is basically a Hydraulic sway bar system. The rear springs drop out but the front doesn't have the same range of motion and needs thebsystem to be depressurised to allow the front springs to be removed safely and then depressurised on completion.
The front also needs new Upper Control arms to increase front axle load rating adding 180kgs to the front for the bar and winch
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following 4 Users Say Thank You to MudRunnerTD For This Useful Post:
BigRAWesty (18th May 2024), BrazilianY60 (18th May 2024), MB (19th May 2024), PeeBee (18th May 2024)