new gearbox mounts, most of the exhaust is in place, few more bits to get hold of then i can start fitting up the rest.
once this is all done i can fix the a/c and rear suspension bushes, deck out the back redo the rear bar.
new gearbox mounts, most of the exhaust is in place, few more bits to get hold of then i can start fitting up the rest.
once this is all done i can fix the a/c and rear suspension bushes, deck out the back redo the rear bar.
if its worth doin its worth over doin
if its worth doin its worth over doin
Is the boost electronic controlled on that turbo?
Is it too big of a turbo for the TD? I noticed it required spacers at the manifold.
1997 Blue Nissan Patrol Y60 blacktop TD42 - Honey Badger (build thread)
2006 White Nissan Patrol Y61 TB45 - G-Unicorn (build thread)
1997 Red Suzuki Samurai Canvas Top SJ413 - Tatui
2005 White Toyota Landcruiser FZJ105 - Stormtrooper
if its worth doin its worth over doin
pump.jpg
pumps in
progress.jpg
Last edited by garett; 16th March 2024 at 05:46 PM.
if its worth doin its worth over doin
AB (16th March 2024), BrazilianY60 (24th March 2024), MB (18th March 2024), PeeBee (23rd March 2024)
progress2.jpg
getting closer
progress3.jpg
if its worth doin its worth over doin
BrazilianY60 (24th March 2024), MB (18th March 2024), PeeBee (23rd March 2024), Touses (23rd March 2024)
dump pipe made oh boy is the welding bad, but it seals
dump.jpg
if its worth doin its worth over doin
BrazilianY60 (24th March 2024), MB (24th March 2024), mudnut (23rd March 2024), PeeBee (23rd March 2024), Touses (23rd March 2024)
Stress less, welding looks fine Garret Old Mate, don’t forget She’s an oily diesel 4.2TD residue weapon now too
Did use to have issues on old mild steel radius bend welded Landcrab 2F petrol homemade headers and LPG doing some sort of crystallisation degradation of dodgey welds my nuffy self
Sent from my iPhone using Tapatalk
well the flange is stainless, radius mild, straight is stainless back to aluminized steel ... i tig welded it.
getting a bit more done
beanie.jpg
progress4.jpg
if its worth doin its worth over doin
ok so i'm down to bleeding the fuel system, priming the turbo with oil, adding coolant, oil change, make a coolant bottle, make the intercooler fit somehow. and connect the new senders.
re run diff breather and vacuum line. move the ac hoses/get the ac working, rear suspension bushes, fit the kitchen make the boxes over the rear guards......
and now fix the power steering belt tensioner.
if its worth doin its worth over doin
BrazilianY60 (29th March 2024), MB (30th March 2024), Touses (29th March 2024)