GQ Patrol headligh surround grill clips

[PeeBee]

The GQ Patrol has 2 plastic clips either side that clip the grill into the front guards. I am trying to locate the name and a supply of 4 of these as mine are pretty shot and grill does not marry up tight with the guards. I am not talking about the 4 units that run across the top edge of the grill - I have replaced those with a metal clip and screw, and these work well.

[mudnut]

I just cable tie the grill to the body, so that the bonnet clips I have mounted on the grill have something to anchor to.

[MB]

Would be honestly keen to learn their name, availability too Philstar
I’m thinking about changing over from $$ OEM to maybe a Hills-Hack Rough-Job cheaper variant via Bunnings/Ramset WallMates sawn off after insertion







Sent from my iPhone using Tapatalk

[BrazilianY60]

My GQ has none and currently uses tie-wraps to hold the grill (very nice and tight I may add), but I recon there are two types, one black and one gray. On the GU it uses only a pair of the black ones and none of the grays. Not sure if one of those is what you are looking for.


Black ones:
https://www.aliexpress.com/item/1005...Cquery_from%3A

Gray ones:
https://www.aliexpress.com/item/1005...Cquery_from%3A

[PeeBee]

Thanks BY60, these dont look like the ones I think I need - will pull one off grill next time I am with it - maybe I am wrong

[PeeBee]

Would be honestly keen to learn their name, availability too Philstar
I’m thinking about changing over from $$ OEM to maybe a Hills-Hack Rough-Job cheaper variant via Bunnings/Ramset WallMates sawn off after insertion







Sent from my iPhone using Tapatalk

Could be a counter question at PAP I reckopn, or I try something like a hutsert but they are in a bugger of a spot to get to if trying to do a bolt up.

[PeeBee]

I just cable tie the grill to the body, so that the bonnet clips I have mounted on the grill have something to anchor to.

Thanks Craig, I will look at this option also.