OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 7 of 7

Thread: CRD timing chain & gear removal

Threaded View

  1. #4
    Patrol Guru pollenface's Avatar
    Join Date
    Nov 2019
    Location
    Perth
    Posts
    536
    Thanks
    66
    Thanked 245 Times in 178 Posts
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)
    I've turned the motor over about 10 times and nothing is lining up.

    The yellow link on the chain does not line up with the mark on the fuel pump sprocket. The two grey links do not line up the marks on the cam sprocket.

    The C on the fuel pump gear doesn't line up with the CC on the crank. The AA and BB on the idler gear between the cams will NOT line up with the A & B of the cams. No amount of turning the motor over can correct this.

    I can get the A, B and CC in what I believe is the right position but the AA,BB & C are out.

    Has anyone seen this before? I believe the cam idler and fuel pump gear where not installed in the correct orientation from the factory.

    20230906_111403.jpg20230906_111318.jpg
    Attached Images Attached Images
    Last edited by pollenface; 6th September 2023 at 01:54 PM. Reason: reduce pic size
    2008 CRD Auto Wagon

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •