hi there just wondering if anyone has a diagram of a front air dam gu 2003 td4.2 stl https://unsealed4x4.com.au/wp-conten...-Airdam-2.jpgs , as the 2003 model is bigger looking to make one
hi there just wondering if anyone has a diagram of a front air dam gu 2003 td4.2 stl https://unsealed4x4.com.au/wp-conten...-Airdam-2.jpgs , as the 2003 model is bigger looking to make one
I made one years ago for my GQ, i actually made it to help with Bow wave for River crossings and Mud bog holes. It was an easy thing to bend up. I screwed it to he chassis crossover and the base of the radiator support. worked a treat. I think @AB might now have it on his car. It was mega easy to work out. 3 section, 2 fold piece. each fold is 45degrees.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!! ....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
braz-3.0l (21st July 2023), rusty_nail (28th June 2023)
I never fitted it and @Rossco stole it off me years ago lol
braz-3.0l (21st July 2023), MudRunnerTD (30th June 2023), PeeBee (29th June 2023)
Had one of those front bash plates that bolt to chassis rails but totally be a bad outcome if jammed up into the steering linkages, so took to it with an angle grinder, cut 70mm off lip and bought some 20mm conveyor belt scrap that will be attached (maybe metal strip w/nuts, bolts) _ cardboard is the concept (fill in gap between rails). Finish it some day.
2008 GU WAG ST Manual CRD - To do the job
braz-3.0l (21st July 2023)