Quote Originally Posted by mudski View Post
You can use the ZD belhousing but you need to modify where the starter mounts.

If you have the wide radiator, not the skinny tall one, you can use this just need TD hoses ,including heater hoses.

The gearbox is fine to use.

The crossmember you will need a TD one as this pushes the motor forward 10mm. Otherwise in reverse the exhaust manifold hits the firewall.

Get Killa Kustoms to mod your loom, so much easier than trying to work it out your self.

You'll need the weld on engine mount brackets to weld to the chassis. Patrol a Part sell these.

TD accelerator pedal and cable.

Clutch and flywheel of course, although I am told the ZD clutch fits. Just get the right one though and be done with it.

Thats pretty much it from memory.
thanx for the info.
i do have the td42 bell housing. have also just got a new radiator to suit both the zd and td. using the td crossmember will it affect the tail shafts at all?
i have got the engine mount brackets from patrol a part. also have the pedal amd cable. my dad is a whiz with wiring so will leave that up to him.