jay see (9th October 2021)
A lot of gasless needs the polarity to be reversed. So the electrode into the negative and the earth clamp into the positive. This will help to settle it down and make it run smoother for you. But it is always best to check the manufacturers instructions as the electrode polarity will be in them.
jay see (9th October 2021)
I never had much luck with gasless. Always sketchy. I bought a TIG and never looked back.
My advice is: not to follow my advice.
Sorry @MudRunnerTD I only just saw your post , yeah we took heaps of before , during & after pics , the wife is onto the insurance company about it . I’ll let you know how we get on .
MudRunnerTD (10th October 2021)
Guy at work has the same welder and has no issues using it as a gasless. I'll try a new tip and see how it goes. Besides the last roll of wire I brought was a 15kg roll of gasless wire, if it's still giving me issues I'll change to gas when I need more wire..
Sent from my CPH1979 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
Theres no issues with using it gasless agreed. but using with gas is easier and a much better weld.
rusty_nail (6th November 2021)