-
9th August 2020, 06:19 PM
#431
-
The Following User Says Thank You to MB For This Useful Post:
jay see (9th August 2020)
-
9th August 2020 06:19 PM
# ADS
Circuit advertisement
-
9th August 2020, 08:59 PM
#432
Moderator
Originally Posted by
Mickhead
Looks great but it doesn't do Mig Bugger it. If it did I might grab it myself.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
-
9th August 2020, 10:27 PM
#433
The master farter
Originally Posted by
TPC
Why wouldn't you use it?
It’s a limited numbered collectors item. Once my room down stairs is done I’ll get another dart board to use.
Sent from my iPhone using Tapatalk
-
-
9th August 2020, 10:34 PM
#434
Legendary
Originally Posted by
mudski
It’s a limited numbered collectors item. Once my room down stairs is done I’ll get another dart board to use.
Sent from my iPhone using Tapatalk
Or you could give it to me and I'll use it. Limited number collectors. 🥱
Sent from my CPH1979 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
9th August 2020, 11:17 PM
#435
..........
Originally Posted by
mudski
It’s a limited numbered collectors item. Once my room down stairs is done I’ll get another dart board to use.
Sent from my iPhone using Tapatalk
Would be worth more with some holes in it.
-
The Following User Says Thank You to TPC For This Useful Post:
MudRunnerTD (10th August 2020)
-
10th August 2020, 10:04 PM
#436
The master farter
Originally Posted by
jay see
Or you could give it to me and I'll use it. Limited number collectors. 🥱
$550 and its yours.
Originally Posted by
TPC
Would be worth more with some holes in it.
Definitely not.
-
-
11th August 2020, 08:15 AM
#437
The master farter
Originally Posted by
jay see
Wanting to buy a welder..
Something just for the odd job at home.
What have people got and what do you recommend.
Sent from my CPH1979 using Tapatalk
John I bought a Cigweld gas/gas less welder. Cost about $100 a year to rent a gas bottle. It’s cheaper these days to buy outright and just fill it when needed.
Mines not too notch but it has work well for anything I’ve used it for.
IMG_3320.jpg
Sent from my iPhone using Tapatalk
-
-
13th August 2020, 01:25 AM
#438
Legendary
Originally Posted by
Mickhead
This looks good. It's a MIG Gas/Gasless and MMA/Stick electrode as well as DC TIG welder.
Bunnings have it for $500
Originally Posted by
mudski
John I bought a Cigweld gas/gas less welder. Cost about $100 a year to rent a gas bottle. It’s cheaper these days to buy outright and just fill it when needed.
Mines not too notch but it has work well for anything I’ve used it for.
IMG_3320.jpg
Sent from my iPhone using Tapatalk
I see yours is a130 amp. Do you trip your power when using it. Talking to a few welders at work they all said go at least 170 amp.
Sent from my CPH1979 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
13th August 2020, 08:11 AM
#439
The master farter
Originally Posted by
jay see
I see yours is a130 amp. Do you trip your power when using it. Talking to a few welders at work they all said go at least 170 amp.
Sent from my CPH1979 using Tapatalk
Thats welders talking... I welded 3mm plate on the bull bar with this mig not even on the highest setting and it worked a treat. I'd have to look at the spec on the inside of the access panel on the welder but I think it does up to 5mm. And my house was built in the early 70's, original house wiring, and I have burnt the house down. The breakers didn't go off so its not overloading the system.
The welder was on special somewhere when I got it. It was cheap. But bloody handy. And being Cigweld, they are a good brand so it was a no brainer.
One day I will upgrade with a Tig, not sure if I would use this or not. The welder doesn't get used much at all. I've had the same gas bottle for four years. Lol.
-
-
13th August 2020, 03:52 PM
#440
Patrol Guru
Originally Posted by
mudski
Thats welders talking... I welded 3mm plate on the bull bar with this mig not even on the highest setting and it worked a treat. I'd have to look at the spec on the inside of the access panel on the welder but I think it does up to 5mm. And my house was built in the early 70's, original house wiring, and I have burnt the house down. The breakers didn't go off so its not overloading the system.
The welder was on special somewhere when I got it. It was cheap. But bloody handy. And being Cigweld, they are a good brand so it was a no brainer.
One day I will upgrade with a Tig, not sure if I would use this or not. The welder doesn't get used much at all. I've had the same gas bottle for four years. Lol.
I've got a tig and am always on the look out for a cheap/good mig. The tig is very handy but a bit tricky to get used too and significantly slower than a mig. I would save your pennies and stick with the mig unless you had a specific job for it or had the cash burning a hole in your pocket.
I'm not a welder though.. So take that with a grain of salt.
2003 GU TD42 with a few extra ponies
-
The Following User Says Thank You to 0-TJ-0 For This Useful Post: