-
22nd June 2020, 05:50 PM
#11
-
-
22nd June 2020 05:50 PM
# ADS
Circuit advertisement
-
23rd June 2020, 08:49 AM
#12
Expert
-
The Following 3 Users Say Thank You to makeitfit For This Useful Post:
10G (15th July 2020), MudRunnerTD (19th July 2020), Rossco (23rd June 2020)
-
23rd June 2020, 10:09 AM
#13
Patrol Freak
With the roof, cut a slit in the metal a few inches in and parallel to the gutter. Then "stretch" the roof until the gutters line up. After tacking the roof in place you will need to fill the wedge shaped gap you created with weld (you may even need to cut a small triangle of metal to fit).
-
The Following 3 Users Say Thank You to BillsGU For This Useful Post:
makeitfit (24th June 2020), MudRunnerTD (19th July 2020), Rossco (23rd June 2020)
-
23rd June 2020, 10:13 AM
#14
Patrol Freak
My diff housing was braced this way when I had a GVM upgrade done to the Patrol.
-
-
12th July 2020, 09:18 AM
#15
Expert
-
The Following 6 Users Say Thank You to makeitfit For This Useful Post:
0-TJ-0 (14th July 2020), 10G (15th July 2020), Cremulator (12th July 2020), Cuppa (12th July 2020), Rossco (12th July 2020), Touses (14th July 2020)
-
14th July 2020, 09:41 AM
#16
Expert
Top news today, I just sold the axles off the old Y60 £650 old skool money pounds
Minutes later I converted half that into an OM606 engine, which is an absolute steal.
Now got to start buying tube for arms etc
Exciting
Y60 Patrol 4.2 d SWB in puke green
2" body lift, 2" pedders suspension lift, 35" Simex muds on excel 16" alloys, needs a turbo :/
-
The Following 7 Users Say Thank You to makeitfit For This Useful Post:
0-TJ-0 (14th July 2020), 10G (15th July 2020), mudnut (14th July 2020), MudRunnerTD (19th July 2020), PeeBee (14th July 2020), Rossco (14th July 2020), Touses (14th July 2020)
-
14th July 2020, 11:10 AM
#17
Legendary
Ooh nice one. What are your plans for the motor, any idea on what kind of power you are chasing? . .
Sent from my SM-G930F using Tapatalk
-
-
15th July 2020, 02:52 AM
#18
Advanced
So this is where you're hiding Pete
Watching this with interest, have thought about turning my shorty into a pickup/ute a few times.
1990 4.2 Diesel SWB Safari MT - 2" lift + long travel shocks, 33" MTs, -35 Steelies, 17000lb winch, Steel bumpers, Rock sliders, Snorkel, CB, Manual hubs, LED lightbar, Rear secure drawer, Rear drop down table, Manual gearbox conversion.
-
-
15th July 2020, 08:52 AM
#19
Expert
Originally Posted by
Rossco
Ooh nice one. What are your plans for the motor, any idea on what kind of power you are chasing? . .
Sent from my SM-G930F using Tapatalk
Motor plans are a bit sketchy at the mo but I have a mechanical pump, soon to go off to DieselMeken I also have a very large supercharger !!!
Initially I'll be quite happy with the 200 bhp straight out the box.
Y60 Patrol 4.2 d SWB in puke green
2" body lift, 2" pedders suspension lift, 35" Simex muds on excel 16" alloys, needs a turbo :/
-
The Following 2 Users Say Thank You to makeitfit For This Useful Post:
10G (15th July 2020), Rossco (15th July 2020)
-
15th July 2020, 08:56 AM
#20
Expert
Originally Posted by
Barrbeast
So this is where you're hiding Pete
Watching this with interest, have thought about turning my shorty into a pickup/ute a few times.
Cant hide with a Trol mate lol
Just things seem a tad quiet on the old Nissan site, plus a brown one reqd
So much to do and this place has more info than I'll ever know what to do with .
Let's hope I can get this thing running soon. We're due a meet up again.
Y60 Patrol 4.2 d SWB in puke green
2" body lift, 2" pedders suspension lift, 35" Simex muds on excel 16" alloys, needs a turbo :/
-