The image from the camera has it flush with the block, but I will see tomorrow morning when I get the plates apart.Originally Posted by nissannewby
The image from the camera has it flush with the block, but I will see tomorrow morning when I get the plates apart.
Good points Darren, I asked about the 240V corded versions and they were close to $700 each! I am sure it will get used, but they were all around this 280-325 mark, so just went with the brand i had batteries for.
MudRunnerTD (1st June 2020)
They are great for tradies doing rough ins on new houses!
Sent from my SM-G986B using Tapatalk
PeeBee (1st June 2020)
This Stanley ratcheting screw driver is great. I bought it because the hex sized screwdriver and Allen head bits fit into it. I wanted something that had greater reach and was easier to do up or undo Allen key bolts.
There are two sizes, short and long and it was only once I used it I found that the long extension is removable! So you effectively get the short version too. Bonus.
There are bits in the handle, but I've rarely used them.
Highly recommended of you hate removing and resetting Allen keys to tighten or remove bolts.
Last edited by Cremulator; 3rd June 2020 at 03:38 PM.
0-TJ-0 (3rd June 2020), PeeBee (3rd June 2020), rusty_nail (3rd June 2020)
Just seen this circ saw on Maine cabin masters!!! What a bloody beast! For those not Familiar with stupid imperial, the blade diameter is over 413mm!!!
Sent from my SM-G965F using Tapatalk
I got red dust in my veins.
Check out My Rig here: Broken
Pics of Forum trips I've Been on:
Pizza at AB's - 2012 Knockwood - 2013 Krissos Place Australia Day - 2015 Pizza at AB's - March 2015 Pizza at AB's - May 2015 Dargo - 2015 Newnes - 2016
WARNING: Towballs used for recoveries can, and do kill people and damage property.
What would be the cutting depth on that one nicco?Just seen this circ saw on Maine cabin masters!!! What a bloody beast! For those not Familiar with stupid imperial, the blade diameter is over 413mm!!!
Sent from my SM-G965F using Tapatalk
Gong him Red!!
Probably around 180mm? I reckon it would still cut deeper than a 12" dropsaw
Sent from my SM-G965F using Tapatalk
I got red dust in my veins.
Check out My Rig here: Broken
Pics of Forum trips I've Been on:
Pizza at AB's - 2012 Knockwood - 2013 Krissos Place Australia Day - 2015 Pizza at AB's - March 2015 Pizza at AB's - May 2015 Dargo - 2015 Newnes - 2016
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Would wanna be Japanese Makita too, not from the chinese division.
Gong him Red!!
rusty_nail (4th June 2020)
They have stuff mate in England too! My 18v planer is English made. The Japanese stuff is definitely better quality than the Chinese tools
Sent from my SM-G965F using Tapatalk
I got red dust in my veins.
Check out My Rig here: Broken
Pics of Forum trips I've Been on:
Pizza at AB's - 2012 Knockwood - 2013 Krissos Place Australia Day - 2015 Pizza at AB's - March 2015 Pizza at AB's - May 2015 Dargo - 2015 Newnes - 2016
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Wow didn't know about the pommy factory. Have always preferred makita tools, and when i bought the rattle gun a few years ago I had to be particular. The good from Nippon. The not-so-good from Bat Soup central.
Gong him Red!!
Posting Permissions
Reply With Quote
