Came across this. Be better than my current one, even with the long ass cable that I made it's still a pita.
https://www.4x4andcamping.com.au/pro...flator-charger
Sent from my CPH1979 using Tapatalk
Came across this. Be better than my current one, even with the long ass cable that I made it's still a pita.
https://www.4x4andcamping.com.au/pro...flator-charger
Sent from my CPH1979 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
Please do keep in mind that most of our Patrol OEM torque specs are circa 130Nm ish for wheel nuts I believe (double check your manual/model variants) to be sure!
No particular favour but I’ve just downgraded my onboard 1,000Nm beast Milwaukee 18v 1/2” (ring drive a must/never pin) to a 600Nm 18v 1/2” ring drive purely for usage weight with crook hands.
For tool longevity it is best I believe to go 1/2” drive as O-TJ-O kindly suggested above and I’d personally suggest at a least 300Nm minimum for cracking (undoing) stubborn wheel nuts especially on trailers that may sit around for a while.
NEVER rely on your rattle gun to torque up to OEM wheel specs properly again when refitting.
A torque wrench is the only way to be fully sure for that last correct nip up after spinning the nuts back on quickly with your new coming gun of choice
Sent from my iPhone using Tapatalk
Happy to call past yours one arvo mate, I'm working in the west ATM so most arvos go home though GB. mine develops 2000nm I believe, have always tried to nip up the nuts after tightening by hand but have never been able to turn much more. Fwiw yes it's Makita.
Sent from my SM-G930F using Tapatalk
I got red dust in my veins.
Check out My Rig here: Broken
Pics of Forum trips I've Been on:
Pizza at AB's - 2012 Knockwood - 2013 Krissos Place Australia Day - 2015 Pizza at AB's - March 2015 Pizza at AB's - May 2015 Dargo - 2015 Newnes - 2016
WARNING: Towballs used for recoveries can, and do kill people and damage property.
dpetersen (7th May 2020)
FWIW: I’ve sheared wheel studs off at 200Nm with my bare hands :-)
Sent from my iPhone using Tapatalk
Winnie (2nd May 2020)
I got red dust in my veins.
Check out My Rig here: Broken
Pics of Forum trips I've Been on:
Pizza at AB's - 2012 Knockwood - 2013 Krissos Place Australia Day - 2015 Pizza at AB's - March 2015 Pizza at AB's - May 2015 Dargo - 2015 Newnes - 2016
WARNING: Towballs used for recoveries can, and do kill people and damage property.
MB (2nd May 2020)
I am hoping Rusty means 200 not 2000? Typo I suggest. My 240V 1/2" driver runs out at 600nm and that will shift just about anything I will come across.
MB (2nd May 2020)
I’m sure they’ve probably invented mate but unsure if I’d personally trust it.
Do know your boss will kick your arse if you were to drop his calibrated torque wrench from a massive 20cm height impact let alone rattling built into a gun all day?
Sent from my iPhone using Tapatalk