What has made you Angry Today???????

[Bidja]

'Death Wobbles' are an Harmonic Effect so if the outside factors remain constant they just get worse and worse

If left unchecked IE you don't speed up or slow down to change the harmonics then they can be violent enough to shake the entire car quite severely, certainly enough to scare your pucker valve into slamming shut.

I had a case of death wobbles on my Tray Back that were significantly more violent than the gnarliest corro's I have ever driven on.
The vehicle was frightening at anything like a constant speed between 75 to 85 KPH but happy to sit below or above that speed

@Maxhead @the evil twin
Reminds me of my first car GMH_FC '59 stat wagon, trying out my first eng swap "red motor 179" and tail shaft was out of balance but vibration smoothed at out speed haha.
Comes down to form fit and function.

[PeeBee]

Here ia the eBay link

https://rover.ebay.com/rover/0/0/0?m...2F253239892969

And here is the screen shots. I have sent my pics to the seller but don't expect a reply as I have already left positive feedback...







Sent from my SM-G977B using Tapatalk

Notice 2 yr warranty - what are the strings attached to that?

[Ben-e-boy]

Because the Geelong Freeway requires long arms ... I was actually thinking about whether the arms were in vice versa on the way home tonight from Matts place. Very strange to see all four fail.

It will handle better on and off road

[Ben-e-boy]

and the thing was rear steering it's head off.
.

Why so much rear steer?

Are you tightening the bolts right up before you put all the body weight on them?

[MudRunnerTD]

Why so much rear steer?

Are you tightening the bolts right up before you put all the body weight on them?

Nah I tighten the at ride weight. The left side had fully collapsed and that made the rear diff out of alignment. It would drive ok but had a really twitchy ass. Was thinking it might have been my front end actually as I didn't expect those bushes to be wrecked. Like my caster mysteriously went to shit.

Put the factory arms back in ( so nearly dumped them a heap of times!!) And it's much better.

[MudRunnerTD]

Notice 2 yr warranty - what are the strings attached to that?

Did not see that!!! I probably did see that when I bought them and figured they would be ok. Will see if I get a response from them via eBay for sure!

[MudRunnerTD]

Here ia the eBay link

https://rover.ebay.com/rover/0/0/0?m...2F253239892969

And here is the screen shots. I have sent my pics to the seller but don't expect a reply as I have already left positive feedback...







Sent from my SM-G977B using Tapatalk

Well i sent this seller a message and to their credit the replied on first business day. They advised that they have sold over 300 sets and received 5 complaints about the quality (1.5%). They immediately offered me a full refund which i accepted and they deposited it back into my Paypal today. Second Business day.

[mudski]

Well i sent this seller a message and to their credit the replied on first business day. They advised that they have sold over 300 sets and received 5 complaints about the quality (1.5%). They immediately offered me a full refund which i accepted and they deposited it back into my Paypal today. Second Business day.

Well thats a win. Good to see sellers stand by their business rather than make it a shit fight.

[Avo]

Well thats a win. Good to see sellers stand by their business rather than make it a shit fight.

Good business is good business,5 out of 300,its a shame alot of smallish places dont see that,I bet now that the op has had a good experience they are less likey to tell people about the shit bit...smart business

Sent from my SM-G930F using Tapatalk

[Stephenn]

Well after a lot of piss farting around I finally found out that the oil feed line to my turbo in my block is 1/8 bspt.