Thankyou AB for all the hard work gone into this
Thankyou AB for all the hard work gone into this
thanks for the manual
Hi all just. I’m wanting to rebuild a 99 gu 2.8 gearbox. It’s for my sons 18th and just want some advice as to rebuild kits, manuals. It’s my parents old car they are handing down to their grandson. It was stopped being driven last yr and we dropped the oil out of transmission and there was quite a bit of metal in there. It was hard to get into and out of 2 gear. I’m quite handy with rebuilding thing just want to know the right parts I might need and a manual to guide me through. I’m going to get the basic kit with bearings and seals then purchase parts that are damaged when I come a cross them. So any ideas for places for cheap gears sincros if I need them. Any help would be greatly appreciated
Also I have read the previous posts and I can’t believe the knowledge a lot of you have and that you are so generous to pass it on. Any info, videos or website that you have knowledge of that could assist would be fantastic. Thank you in advance
Hi mate, just read your two posts, as you seem to have garnered, you will learn alot more from the members on here than the manuals. If you have a specific question (such as rebuild kitsch etc) I suggest starting a thread with your questions and intentions? Alot of the more knowledgeable members dont venture into this thread as most people that come here are one post wonders "thanks for the manual" never to be seen again.
Sent from my SM-G930F using Tapatalk
I got red dust in my veins.
Check out My Rig here: Broken
Pics of Forum trips I've Been on:
Pizza at AB's - 2012 Knockwood - 2013 Krissos Place Australia Day - 2015 Pizza at AB's - March 2015 Pizza at AB's - May 2015 Dargo - 2015 Newnes - 2016
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Thank you. I have posted a new thread:
GU 1999 2.8l 5speed manual Gearbox rebuild help required
Last edited by Rustyno1; 14th July 2019 at 02:48 PM. Reason: Tread title
If you could send traffic to that tread I would appreciate it
thanks for the manual!
Thanks for putting up manual. Legend