Hi All,
Over the last two weeks I have been experimenting with putting an IPad into my mates GQ.
I have made it so you will be able to dock the iPad and charge when in car as well as being able to use it outside of car.
I had to relocate the Air con unit and move the single din head deck a little lower.
Parts needed;
Second hand Centre Facier ( so you don’t destroy the original )
iPad Air 2 ( or IPad of your choice )
3mm Acryllic plastic
Fibreglass matting
Fibreglass catalyst
Fibreglass Mould Release
Painters tape
Alfoil
Masking tape
Epoxy glue / Super glue
Septone car filler
Wet and dry sand paper ( 180/320/800/1200 )
Your choice of primer, paint and clear