-
5th November 2018, 03:31 PM
#1101
The 747
Thanks guys. Got a message from Nissan newby and he reckons it's M12x1.5mm
I will grab one on Wednesday now and hope it is right but it does sound good.
Had issues at Enzed this morning, the reckon M10x1.5mm is very unusual and they have had to order stuff in so I am hoping it is all here before the weekend.
Sent from my SM-G960F using Tapatalk
-
-
5th November 2018 03:31 PM
# ADS
Circuit advertisement
-
6th November 2018, 06:39 AM
#1102
Winnie, maybe a typo but M10 x 1.5P is a standard metric coarse thread pitch, about as rare as politicians lies! M12 x 1.5 is equally as common as a metric fine pitch, so no idea why they told you that. It might be a rare liquid fitting though, however they have every adapter under the sun avail t them, again should not be an issue.
-
-
6th November 2018, 06:44 AM
#1103
The 747
Originally Posted by
PeeBee
Winnie, maybe a typo but M10 x 1.5P is a standard metric coarse thread pitch, about as rare as politicians lies! M12 x 1.5 is equally as common as a metric fine pitch, so no idea why they told you that. It might be a rare liquid fitting though, however they have every adapter under the sun avail t them, again should not be an issue.
Yep, could not buy an m10x1.5 to -4an adaptor from Enzed. He did help me with where to find one (the internet) but I bloody hope it arrives before the weekend.
Sent from my SM-G960F using Tapatalk
-
The Following 2 Users Say Thank You to Winnie For This Useful Post:
PeeBee (6th November 2018), threedogs (7th November 2018)
-
6th November 2018, 06:51 AM
#1104
Originally Posted by
Winnie
Yep, could not buy an m10x1.5 to -4an adaptor from Enzed. He did help me with where to find one (the internet) but I bloody hope it arrives before the weekend.
Sent from my SM-G960F using Tapatalk
Do you have the room to do it it in a couple of steps, instead of a straight M10 to AN4 config?
Did ou try autobarn or super cheap by any chance?
-
-
6th November 2018, 06:56 AM
#1105
I have dealt with these guys a bit and they will slam one in an express bag for you, no problems, just takes a call if you are in doubt with the other one.
https://www.ebay.com.au/itm/Metric-A...8Bs:rk:21:pf:0
-
The Following User Says Thank You to PeeBee For This Useful Post:
threedogs (7th November 2018)
-
6th November 2018, 07:13 AM
#1106
The 747
Originally Posted by
PeeBee
Do you have the room to do it it in a couple of steps, instead of a straight M10 to AN4 config?
Did ou try autobarn or super cheap by any chance?
No I haven't tried them. I ordered from a company in Sydney called Earl's speed parts. He express posted it yesterday, and other than that the bloke at Enzed reckons he will have the parts to make my hoses tomorrow which I will take home and get lined up, then take back to him so he can crimp them
Sent from my SM-G960F using Tapatalk
-
The Following User Says Thank You to Winnie For This Useful Post:
PeeBee (6th November 2018)
-
6th November 2018, 09:45 AM
#1107
Hey as an option, maybe too late, Enzed do sell a light blue hose with barb fittings that dont need any crimping or clamps. You cut the hose and push then fitting into the hose. They have to be cut off with a stanley knife to get them apart. They are widely used in the mobile construction/mining game. I used this system on my hydraulic winch and it is so simple, no leaks at 3000psi and 90 degC, think they are rated at 300degC from memory.
-
-
6th November 2018, 01:24 PM
#1108
Patrol God
Originally Posted by
Winnie
Only the kool kids run double vac haha.
I got the vac pump and flywheel today. Need to get the flywheel machined up and a hose made for the vac pump.
Sent from my SM-G960F using Tapatalk
Hi Winne are you getting the fly wheel lightened ,,or not worth itt??
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
6th November 2018, 05:05 PM
#1109
Smart like tractor
Originally Posted by
threedogs
Hi Winne are you getting the fly wheel lightened ,,or not worth itt??
Lightened and a balance..... it should be
96 GQ coil/Cab
08 G6eT
-
The Following User Says Thank You to Ben-e-boy For This Useful Post:
threedogs (10th November 2018)
-
6th November 2018, 05:45 PM
#1110
The 747
The only local place that could do it wanted $1200 to get it balanced and lightened.
I ended up getting it machined at another place.
Sent from my SM-G960F using Tapatalk
-