-
25th January 2018, 07:24 AM
#8191
Patrol Freak
Originally Posted by
jay see
Thanks mate.
Kinda thought that's the going price.
Sent from my A1601 using Tapatalk
Unless you wanna do a mudski....
Sent from my iPhone using Tapatalk
2008 GU6 3.0 CRD AUTO | Safari Snorkel | 2" Ironman lift kit | Runva 11XP Winch | 33" MTZ's | Full Length Roof Rack | GME TX3200 | 30" LED Light Bar |
-
-
25th January 2018 07:24 AM
# ADS
Circuit advertisement
-
25th January 2018, 12:03 PM
#8192
Legendary
Originally Posted by
Bacho86
Unless you wanna do a mudski....
Sent from my iPhone using Tapatalk
Nah, for about the same $$ and rwkw I'll prefer to listen to a v8.
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following User Says Thank You to jay see For This Useful Post:
Bacho86 (26th January 2018)
-
25th January 2018, 01:05 PM
#8193
Patrol God
Originally Posted by
Bacho86
Unless you wanna do a mudski....
Sent from my iPhone using Tapatalk
@mudski has done the right thing.
If I was doing a conversion , I'd get the motor a tad spiced up while it's out on the bench.
I love listening to that turbo out of his car ... Even just when the motor starts , the whistle rising up to idle is just phenomelan.
And driving behind it seeing the car just waltzing around at even slightest squirt of throttle is amazing. I got some dash cam footage.
All this while I'm in my tractor slug digging for lower gears lol.
Sent from Note 5 using TapaPro
Last edited by Hodge; 25th January 2018 at 04:57 PM.
2005 TD42TI
-
The Following 2 Users Say Thank You to Hodge For This Useful Post:
Bacho86 (26th January 2018), jay see (26th January 2018)
-
25th January 2018, 04:58 PM
#8194
Legendary
[/QUOTE
If I was doing a conversion , I'd get the motor a tad spiced up while it's out on the bench.
I love listening to that turbo out of his car ... Even just when the motor starts , the whistle rising up to idle is just phenomelan[/QUOTE]
If I had a blank cheque I wouldn't spice it up a tad I'll do alot. Unfortunately I don't.
As for the whistle, what about a whistling Turboed Ls. Now that would be nice..
I wish I had that blank cheque.
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following User Says Thank You to jay see For This Useful Post:
Hodge (25th January 2018)
-
26th January 2018, 04:25 PM
#8195
Finished off the remainder of all my tasks except the antenna replacement.
1) completed the Endless air brackets and ran the system, but not generating pressure - so back to endless air about that - suspect it needs to run faster with higher belt tension - so I guess this is now NOT finished
2) mounted the brake compensator plate above rear axle - brakes a lot more evenly now whereas the front was the bias
3) Mounted the twin ARB Difflock vent valves to allow dumping of moist air at the end of the day - @MB had issues with this on a snow trip last year
4) finished off the odds and sods with the belly tank and put in 60L - no leaks and fills faster than the main tank, so very happy after hearing all sorts of stories of the belly tank taking 20 mins to fill from others. Transfer pump works well.
5) fitted the 'bulb' primer as recommended by @Cuppa and others, works well and a lot better than the fuel filter primer pump.
6) packed up the garage mess, grabbed a beer and jumped in the pool.
-
-
26th January 2018, 04:27 PM
#8196
Patrol Freak
Gave the CRD a sweetie today, oil change, drained the crap out of CC, greased her behind the ears and gippas in fuel tank for inject - clean as pay back. She is settling in after 2 so months work, full NADS, ECU remap all the good bits & pieces including work on muffler back pressure to give me 21/22 psi max B @1800RPM, nice spool /egts and of course: 10.2 l/100kms (mix driving 20% dirt/70%hwy/10% town) and not just poking around (3.1T not camped up). Read from Ultragauge EM Plus, Max Torque (100% load) 475Nm (ref only) and from 2000RPM. Yet to do dyno check.
Max B
Last edited by Bidja; 26th January 2018 at 05:15 PM.
2008 GU WAG ST Manual CRD - To do the job
-
The Following User Says Thank You to Bidja For This Useful Post:
PeeBee (26th January 2018)
-
26th January 2018, 07:08 PM
#8197
The master farter
Originally Posted by
Hodge
@
mudski has done the right thing.
If I was doing a conversion , I'd get the motor a tad spiced up while it's out on the bench.
I love listening to that turbo out of his car ... Even just when the motor starts , the whistle rising up to idle is just phenomelan.
And driving behind it seeing the car just waltzing around at even slightest squirt of throttle is amazing. I got some dash cam footage.
All this while I'm in my tractor slug digging for lower gears lol.
Sent from Note 5 using TapaPro
Yeah I love the turbo whistle too. No regrets in what I'd done. But I do love the sound of a nice V8 aswell. I'd whack a supercharger on the V8 though. The whine of a supercharger is just as good as a turbo spooling up.
-
-
27th January 2018, 12:18 AM
#8198
Legendary
Originally Posted by
mudski
Yeah I love the turbo whistle too. No regrets in what I'd done. But I do love the sound of a nice V8 aswell. I'd whack a supercharger on the V8 though. The whine of a supercharger is just as good as a turbo spooling up.
LSA.....
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
1st March 2018, 01:13 PM
#8199
Legendary
Sent the GQ away for injector pump reco, a service and check up and over to get it ready for the cape trip .
-
The Following 4 Users Say Thank You to GQtdauto For This Useful Post:
Avo (2nd March 2018), Bidja (2nd March 2018), MB (2nd March 2018), Rossco (1st March 2018)
-
2nd March 2018, 08:13 PM
#8200
Finished off the radiator water spray bar, modified the aircon fan with a @Cuppa over-ride switch so it can be turned on by itself, relocated the new am/fm radio antenna to get better separation from the other antennas - still don't know if it improved reception - fine in Metro area, crap out in the bush, out of total frustration with the endless air installation, now 'thinking about version 276B', so bought another ARB difflock compressor and swapped this over with the bigger ARB compressor, then located the bigger compressor to where the endless air was to use as tyre compressor only, fixed the hydraulic hose leak - think it was operator error and I didn't do the fitting up correctly - tested winch, all good, maintenance run of the rear electric winch, out and in twice, all good. Time for a rest i believe.
-
The Following 6 Users Say Thank You to PeeBee For This Useful Post:
Bidja (2nd March 2018), GQtdauto (3rd March 2018), Hodge (2nd March 2018), MB (2nd March 2018), Winnie (2nd March 2018), Yeti's Beast (9th March 2018)