@PeeBee
Here you go Phil.
PeeBee (28th December 2017)
Good idea to use those tamperproof Torx ... means no bugger knocks off ya tank when ya nip inta the bottlo for 30 seconds
Dolphins are so smart that within a few weeks of captivity, they can train people to stand on the very edge of the pool and throw them fish.
MB (28th December 2017), MudRunnerTD (21st October 2021)
Hmmmm, yes ET :-) Me thinks some thieving has been occurring from a kiddies playground and or stock room :-(
Sent from my iPhone using Tapatalk
AB (28th December 2017), MudRunnerTD (28th January 2020), the evil twin (28th December 2017)
MB (28th December 2017), MudRunnerTD (28th January 2020), the evil twin (28th December 2017), Winnie (28th December 2017)
... I esp like the lock washer cunningly disguised as two hex nuts
Dolphins are so smart that within a few weeks of captivity, they can train people to stand on the very edge of the pool and throw them fish.
AB (28th December 2017), the evil twin (28th December 2017), Winnie (28th December 2017)
Thanks Mark, gives me a good start, now just have to work out how to get the tank up into position, packing boards I am thinking.
MB (28th December 2017)
Will do my very best mate to finally visit your Cantina before years end and help lift. After properly seeing AB’s today I’m thinking they have designed it pretty bloody well. Looks like the front can be lifted and wedged onto the cross member then thinking a little ratchet strap to lever up the back end and hold whilst marking holes then drop/drill and repeat for final bolt up maybe could work for us?
Sent from my iPhone using Tapatalk
PeeBee (28th December 2017)
No sweat mark, not stressed if it doesn't happen until Feb. I will focus on finishing the endless air project, then am off to Pirtek tomorrow morning for the hose to connect the aux. oil cooler. Feel free do simply drop around if you have the time anyway. Your method has me thinking now, so will have a look again in the morning.
MB (28th December 2017)