Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Have removed now the stock PS coolers and stock lines that were in my way for new oil coolers. The new Davies Craig Hydro Cool for PS cooler replace/relocate has fitted in behind the winch beautifully. Best part has being able to use both of the original PS cooler brackets with only a bit of bending work needed. Did have to make a quick third bracket to support the underside though. All clear on both sides of the truck now to get back onto the 6.5L twin oil cooler project before summer hits!
In the spirit of Christmas spending have today sent to QLD my VIN & Rego & M/C details for certified registered production start on a ‘Blitz’ new GU bonnet. They are kindly including in delivery the front scoop cut out piece so I can play around with hinging and a decent choke type cable for deeper river crossings in theory :-) !
Is this for mod registration in the various states or is the bonnet design 'approved' ? I will ask them tomorrow when I call about one for mine if you don't have the answer
Again unsure good blokes, now starting to worry a little:-(
Wendy there has been fantastic over the last few months and kindly refused multiple times my reshaping custom requests. If not kept standard mould design they were breaking their current structural integrity design as ADR tested/certified I do believe?