BigRAWesty (23rd November 2017)
@GQtdauto, this are the photos of the MIG tip/tip holder/nozzle holder, close-up.
RB30, some 2-3 inch lift auxiliary LPG tanks
Few more mods on the way
http://www.worldwildlife.org/species/tiger
https://www.panthera.org/
Cheetah Outreach
These are the photos of the fitting on the regulator that I had to swap over.
As you can see the original one(silver one) has no O ring.
I added pictures of the inside of the gas bottle fitting. It doesn't look like it's damaged.
RB30, some 2-3 inch lift auxiliary LPG tanks
Few more mods on the way
http://www.worldwildlife.org/species/tiger
https://www.panthera.org/
Cheetah Outreach
Cheers
Kallen Westbrook
dom14 (23rd November 2017)
BigRAWesty (23rd November 2017)
And while were on bottles (which look fine), you only need to crack the bottle open, not 100% like you did in your video.
When on opening a bottle it's only ever 1/4 turn, 1/2 max if I'm feeling generous or bottle is getting empty..
The pressure these bottles are under you don't need much..
Cheers
Kallen Westbrook
dom14 (23rd November 2017)
RB30, some 2-3 inch lift auxiliary LPG tanks
Few more mods on the way
http://www.worldwildlife.org/species/tiger
https://www.panthera.org/
Cheetah Outreach