dom14 (22nd November 2017)
Why was Winnie thinking it costs $500? Was @Winnie referring to the price of a genuine Nissan one from Nissan dealer?
RB30, some 2-3 inch lift auxiliary LPG tanks
Few more mods on the way
http://www.worldwildlife.org/species/tiger
https://www.panthera.org/
Cheetah Outreach
http://patrolapart.com.au/product/ge...and-na-gu-td42
Sent from my SM-G935F using Tapatalk
Ben isnt talking about that bit although that is incredibly dear. You want the dampener that bolts to it which is what I quoted.
dom14 (22nd November 2017)
Just a quick fix for undoing the bolt. I used an impact socket with a breaker bar and a heavy bit of pipe. I wedged the breaker bar and pipe onto the concrete and briefly turned the ignition key to start. It cracked the bolt. This worked on the RB30, but it is a lot smaller than a TB or TD.
To torque the bolt on an auto, place an old V belt on the harmonic balancer and twist it real tight with a bit of strong pipe. Slip a longer bit of pipe through and wedge it onto something solid.
If done right, you should be able to torque the bolt to spec.
My advice is: not to follow my advice.
dom14 (22nd November 2017)
I've been doing the undoing and tightening both by putting it into first gear & combining handbrake or brake(lock the brake pedal using a jack) with it as well.
Does that stress the gears too much??!!
I'm thinking, using a rattle gun would also stress the gears(if it's in gears), would it not?
Last edited by dom14; 22nd November 2017 at 08:48 PM. Reason: grammar and missing words, as usual.
RB30, some 2-3 inch lift auxiliary LPG tanks
Few more mods on the way
http://www.worldwildlife.org/species/tiger
https://www.panthera.org/
Cheetah Outreach
RB30, some 2-3 inch lift auxiliary LPG tanks
Few more mods on the way
http://www.worldwildlife.org/species/tiger
https://www.panthera.org/
Cheetah Outreach
Yeah, wouldn't use the rattle gun on it either, but I know mechanics do(or at least some of them do when they can squeeze in a rattle gun in there).
The reason I asked 'cos I've never used the cranking method to loosen it, and for some reason felt uncomfortable with it, but I do know most guys use that method without any dramas.
I just felt I'm the only one use the gear lock and breaker bar method to undo it.
RB30, some 2-3 inch lift auxiliary LPG tanks
Few more mods on the way
http://www.worldwildlife.org/species/tiger
https://www.panthera.org/
Cheetah Outreach