What did you do to your Patrol today!

[TPC]

I have been through 3 flat sockets on the work 4wd and have changed to the round socket.

[Skitzyrex]

Mine has been smashed after the trip and i hate the flat plug.
So will be doing the same and mounting a round plug socket on the bumper..

This one is a round plug so I'll see how it goes.

[Yeti's Beast]

Fitted a new Sony stereo with reverse camera and Kicker 300 watt speakers

Spewing though because I found out the supplied wiring loom has all the speakers in the wrong position. Oh well time to rip it out again and do a spot of rewiring.


Sent from my iPhone using Tapatalk Pro

[jay see]

After much neglect, I got to clean the inside. Not much I know....

Sent from my A1601 using Tapatalk

[TPC]

Fitted a new Sony stereo with reverse camera and Kicker 300 watt speakers

Spewing though because I found out the supplied wiring loom has all the speakers in the wrong position. Oh well time to rip it out again and do a spot of rewiring.


Sent from my iPhone using Tapatalk Pro

What did that cost you?
I have a piece of shit Elinz unit in mine that half works, should replace it one day.

[Yeti's Beast]

What did that cost you?
I have a piece of shit Elinz unit in mine that half works, should replace it one day.

I got it for $264 at JB Hi Fi , 6.5 inch Kicker speakers $107
It works really good. Has reverse camera that can be activated on the screen as well as when in reverse.


Sent from my iPhone using Tapatalk Pro

[MB]

Removed the original Safari Snorkle and cut the hole.............Quite a cavity below the elbow, makes me wonder how the likes of Patrol a part and Millweld sort this out.

G'day Phil, when Mill removed my GU Safari he made this extra cover/strengthing plate.


Sent from my iPhone using Tapatalk

[PeeBee]

G'day Phil, when Mill removed my GU Safari he made this extra cover/strengthing plate.


Sent from my iPhone using Tapatalk

OK, gotcha. The hole I have is approx 20mm below the new 4" SS bend - really looks untidy. I have been 'dreaming' about how to address it, and was more or less committed to a @Rossco style visit to a panel shop to fix it. I thought I would incorporate the repair with the bonnet vents, but perhaps you have set me on another totally different path to success. I am going to tack this all together tomorrow so my contractors on site can weld it out next week - bloody handy having a pool of great guys with skills to match who are happy to help. Thanks for the heads up Mark.

[VK2FMIA]

Installed new LED H4 globes yesterday & took it for a run last night. Low beam are excellent, high beam not so good, not much brighter than low but all good when the LED driving lights kick in. Will be interesting to see if the H4`s hold up.

Slowly upgrading all lights to led, T10`s on the way for parkers, side indicators & number plate light. Looking at replacing front & rear brake, turn & tail lights down the track.

[Hodge]

Finally got some time to do some odds and ends on it. Finished wiring up the cargo area for fridge, lights . chargers etc...
Off to get it serviced Monday and possible high country trip this coming weekend. Fingers crossed. Need to get out.