Now I have somewhere to put my drink! Yay!
Not overly impressed with the current rear door tables, while they are good it just didn't click. So we are going away this weekend and I didn't want to take my small fold out table and remembered what old mate Kallen said to me many moons ago about making a table to fit on top of the drawers. Thinking to much into it I thought it was all too hard and left it. Until now.
While munching on some Biltong and sipping a Jack and coke I thought to pull out the Jigsaw and give it a whirl. Well It took maybe a whole five minutes from start to finish to make. And I must say its a bloody good table. Haha!
Tools used is a Jigsaw, a pencil, a measuring implement, a straight edge, a whole saw, cordless drill, impact driver and some sand paper.
Materials used. A piece of 12mm thick plywood, cut so the grain of the wood runs left to right for added strength and less flexing, and four timber screws.
Last pic is kinda hard to see. It was getting dark outside. I'll get a better pic with better light....
20170609_171236 (Medium).jpg20170609_171244 (Medium).jpg20170609_171816 (Medium).jpg