-
18th March 2017, 06:18 PM
#1
Wheel bearings? Auto hubs?
So as per my previous post. Though stuffed wheel bearings. Finally went to have a look today. Jacked it up. Went to lock the auto hubs but wouldn't. Closer inspection showed the little plate with the arrow gone. When trying to lock just keeps spinning.
-
-
18th March 2017 06:18 PM
# ADS
Circuit advertisement
-
18th March 2017, 06:21 PM
#2
Sorry. Forgot to add......help!?!?
-
-
18th March 2017, 06:31 PM
#3
.........
And please :-) Only joking mate, would honestly help if I knew, sorry, hopefully someone will be along soon!
-
-
18th March 2017, 07:40 PM
#4
-
The Following User Says Thank You to beexy For This Useful Post:
-
18th March 2017, 08:20 PM
#5
.........
Bump for Beexy please folks, can anyone kindly help a bloke in need?
-
-
19th March 2017, 07:56 AM
#6
Legendary
might have to replace them or tighten them
here is a thread for this thanks to one of our great members
http://www.nissanpatrol.com.au/forum...ing-Adjustment
2007 GU 6 /ST-L / MYO8 / DIESEL/AUTO /MOONSTONE /pro vent 200
OH LEATHER IS NICE
![](image.php?s=441595116e80d427c0ca46088756f932&u=256&type=sigpic&dateline=1352567496)
-
-
19th March 2017, 08:44 AM
#7
My third thanks for the link. The issue I'm having is i can't even lock the hubs now. The nut just keeps on spinning if that makes sense. Not sure if you can take the auto hub off of you can't lock it?
-
-
19th March 2017, 08:56 AM
#8
![](http://i1263.photobucket.com/albums/ii635/beexy86/20170318_180613_zpskkc0ooje.jpg)
Hopefully the photo went through
-
-
19th March 2017, 03:26 PM
#9
Legendary
![Quote](images/misc/quote_icon.png)
Originally Posted by
beexy
Hopefully the photo went through
Is it my imagination or does it look like something's come off the edges of the auto hub assembly centre bolt?!!
-
-
19th March 2017, 03:32 PM
#10
Legendary
![Quote](images/misc/quote_icon.png)
Originally Posted by
beexy
My third thanks for the link. The issue I'm having is i can't even lock the hubs now. The nut just keeps on spinning if that makes sense. Not sure if you can take the auto hub off of you can't lock it?
I guess, you can take it off, but not without causing crud to get into the bearing assembly and damage it in no time.
Auto hub or manual hub assembly works as a bearing dust cap as well, afaict.
If the auto hub is stuffed and not engaging at all, I guess you can leave it until you fix it, unless the auto hub on the other side is working improperly and engaging when not in 4wd mode.
Either way, I think it's a good idea to take the auto hub out and examine the wheel bearings closely, as well as the caliper, pads, rotors, etc.
-