G'day Phil, I'm by no means an expert on these donks sorry mate, just learning my way through them too to make mine hopefully bulletproof. Here is the page photo again from the US military full maintenance download that was posted years ago here.
ACDelco do make several different TS ranges but the yank forums seemed to recommend the 131-103 88Ds which is what I received.
Sent from my iPhone using Tapatalk
Ropes (21st January 2021)
Oil coolers turned up today. Can't complain about the service from the ebay mob being the only stockists in the country I could find. Ordered Friday delivered Monday! Dropped them off to Mill for final fitting and collected whilst in Mansfield some ISO type small exhaust mounts. 'K&M Onsite Auto Electrics' in Mansfield are great blokes and stock a hell of a lot of gear contrary to their biz name, highly recommended !!
Sent from my iPhone using Tapatalk
I hope you have saved the pennies to hook these up - my hydraulic winch hoses cost me a kidney and an ear lobe - horrendously expensive those fittings and hoses.
Mastercard. Priceless :-)
Lucky we all have a good mate in the hose/fittings game!
Sent from my iPhone using Tapatalk
I am struggling on what I hope is one last issue please Mat. The Serck coolers are British/Aussie BSB 1/2" to match my existing as WA bought setup. The 'Derale' oil thermostat/fluid control coming is yanky 1/2" NPT. At some stage on the lines from BSB to NPT threads I need to change forward/back threads twice if that makes sense? Question I guess is are there 1/2"BSB<>1/2"NPT unions in Aus or just have to get em turned up custom? Cheers in advance!
I will put this here as well. 1/2" npt and bspt are the same thread at 14tpi. This means they should be able to be used in each others threads.
Last edited by nissannewby; 28th February 2017 at 07:23 PM.
MB (28th February 2017)