GQ TB42E cracks in engine pipe. Exhaust leaks. Ticking sound in engine.

[Arfa Brayne]

I have 1mtr of 76mm SS flexi pipe here if any one has a need
I can cut in 200mm sections. will need to be fully welded
@Arfa Brayne start saving for a set of extractors you will
acheive great gains from that and a 2.5 system,, lol

Ta 3dogs
Fitted a nice set of extractors and 2.5inch system to my previous TB42 auto.= Surprised and Dissapointed at the result.
Found it reduced bottom end torque but not any power gain in the upper revs, possibly due to undersized LPG system.
No heat related problems, However it did result in a droning exhaust note.

[threedogs]

Ok, cool. I thought we can buy them in desired lengths and they just come with clamp fitting to slide in and fit without having to weld.

I'm a bit lost here about how the flexi pipe manage to flexibility and airtightness while being able to weld it!
No argument it does, I just wonder how the flexi mesh manage that.

You could clamp I suppose.

[JME_GU]

extractors wont hurt your aux battery, ive got a bloody turbo setup on my tb42e and the aux in the back corner of the engine bay and havent had an issue with my aux battery getting hot, but have melted a few rubber hoses and silicone joiners

The problem is not with normal batteries, it's with AGM batteries, they are a lot more sensitive to heat

[GQ TANK]

Most exhaust joints can supply and fit a flexi joint. It cost me $70 to have a joint suooledand fitted

[dom14]

The problem is not with normal batteries, it's with AGM batteries, they are a lot more sensitive to heat

We don't have to install AGMs under the bonnet, do we?!!!

[dom14]

Most exhaust joints can supply and fit a flexi joint. It cost me $70 to have a joint suooledand fitted

Yeah, I was thinking more along the lines of DIY.
Exhaust places usually do a better and quicker job, and DIY doesn't necessarily save money either.
It's just the fun of doing a DIY. Not that fun when I screw up something though.

[Irish]

The problem is not with normal batteries, it's with AGM batteries, they are a lot more sensitive to heat

You can get AGM's that are rated for under bonnet use.