-
11th May 2016, 08:26 PM
#821
Patrol God
Originally Posted by
Hodge
Not a fan of a fan Mat ?
Not really. If the cooler is as good as they claim you shouldnt need one. $2200 should tell you that lol. Do a small experiment. Grab a 50 degree stick on switch from jay car and wire an led into it so when the fan is switched the led comes on.
-
The Following 2 Users Say Thank You to nissannewby For This Useful Post:
BigRAWesty (11th May 2016), Hodge (11th May 2016)
-
11th May 2016 08:26 PM
# ADS
Circuit advertisement
-
11th May 2016, 10:49 PM
#822
Patrol Guru
I in stalled a 50 degree switch on mine, but never actually got around to connecting it, so I guess the worst case scenario. Fan installed but never switches on and my temps are fine.
Cheers Rod
_______________________________________________
Bitumen ...... Another watse of public funds
My Build 2005 TD42TI
-
-
22nd May 2016, 03:17 PM
#823
Patrol God
Finally put a tube of this in it's been sitting on the table for months... See if it makes anything "smoother".
-
The Following User Says Thank You to Hodge For This Useful Post:
BigRAWesty (22nd May 2016)
-
24th May 2016, 07:36 PM
#824
Patrol God
-
The Following 4 Users Say Thank You to Hodge For This Useful Post:
Rocket55 (25th May 2016), threedogs (25th May 2016), Touses (25th May 2016), Woof (24th May 2016)
-
24th May 2016, 07:39 PM
#825
Patrol God
How'd she go on the rollers mate?
-
-
24th May 2016, 07:54 PM
#826
Patrol God
Originally Posted by
nissannewby
How'd she go on the rollers mate?
Was getting really late so she only went on for a very quick run mate, but easily picked up 5-10kW judging only from that. Proper tune is needed for sure.
They had hiccups with a egr pipe completely obstructing the intercooler so cut and chop was needed and bit of fabricating invovled. I believe it is the picture below (I think). I'll go back there tomorrow and talk to the guy who done the work as he wasnt there when I picked her up.
Also below is a photo of part of a intake pipe. You can clearly see the black EGR shit on the inside where in inters the pipe.
Do you think this would pickup a bit of intake noise just with the bigger intercooler? It's definitely got this wind up sound now very evident in the cap, when the turbo spools up. Unsure whether it's intake noise now or a hose is loose or something making a leaking sound.
Lost daylight so, will have to have a better look tomorrow.
-
-
24th May 2016, 08:05 PM
#827
Patrol God
Those coolers are known to be noisy mate. It will most likely be induction noise.
-
The Following User Says Thank You to nissannewby For This Useful Post:
-
24th May 2016, 08:06 PM
#828
Patrol God
I removed all of the egr rubbish on mine.
-
The Following User Says Thank You to nissannewby For This Useful Post:
-
24th May 2016, 09:19 PM
#829
Patrol Guru
Originally Posted by
Hodge
Was getting really late so she only went on for a very quick run mate, but easily picked up 5-10kW judging only from that. Proper tune is needed for sure.
They had hiccups with a egr pipe completely obstructing the intercooler so cut and chop was needed and bit of fabricating invovled. I believe it is the picture below (I think). I'll go back there tomorrow and talk to the guy who done the work as he wasnt there when I picked her up.
Also below is a photo of part of a intake pipe. You can clearly see the black EGR shit on the inside where in inters the pipe.
Do you think this would pickup a bit of intake noise just with the bigger intercooler? It's definitely got this wind up sound now very evident in the cap, when the turbo spools up. Unsure whether it's intake noise now or a hose is loose or something making a leaking sound.
Lost daylight so, will have to have a better look tomorrow.
Yeah mines noisy and once you get a proper tune done you wont know yourself. Mine puts a massive smile on my face every time i drive it now. Can't wait to see what the 4" in/out airbox, 18G and 12mm do.
2004 4.2TDi GU ST Ute, 3" Exhaust, UHF, Lightforce Spotties, BFG All Terrains, Steel Winchbar, Winch, Dual Batts, CC Ultimate IC, 4" Snorkel, XLR8 Steps and Scrub bar
-
The Following User Says Thank You to gubigfish For This Useful Post:
-
24th May 2016, 09:29 PM
#830
Patrol God
Originally Posted by
gubigfish
Yeah mines noisy and once you get a proper tune done you wont know yourself. Mine puts a massive smile on my face every time i drive it now. Can't wait to see what the 4" in/out airbox, 18G and 12mm do.
Good to hear mate. Performance wise think that will be next I think. Intake !
Maybe a little while off though.
Sent from my SM-G920I using Tapatalk
-