At least living in Adelaide, so easier to get to them..pain to get out of truck though. Might ask them for a replacement sender for mine...
At least living in Adelaide, so easier to get to them..pain to get out of truck though. Might ask them for a replacement sender for mine...
AJTich
2004 GUIII, white ST, 3.0L manual wagon, NADS,EGT/Boost,Water Temp/Oil Press gauges, drawers, UHF, stubby cooler on the 4WD selector...
"I don't get bogged, I have unplanned 4WD training activities..."
Thanks Hodgey, Will ask the REDARC guy at the Show on the weekend...see how to get a replacemetn sender.
AJTich
2004 GUIII, white ST, 3.0L manual wagon, NADS,EGT/Boost,Water Temp/Oil Press gauges, drawers, UHF, stubby cooler on the 4WD selector...
"I don't get bogged, I have unplanned 4WD training activities..."
AJTich (21st October 2015)
Hey Hodgey, yes it is scary...
Today my EGT/Boost gauge Boost went to MAX..but after a little while came back to reading correctly.
Starting to wonder about the previous mechanic who fitted them and do i need to redo the whole loom to close that out.
Last edited by AJTich; 26th October 2015 at 04:10 PM.
AJTich
2004 GUIII, white ST, 3.0L manual wagon, NADS,EGT/Boost,Water Temp/Oil Press gauges, drawers, UHF, stubby cooler on the 4WD selector...
"I don't get bogged, I have unplanned 4WD training activities..."
I havent tested my sender unit yet. But i had a look at it and its wet with oil where the wires come out. So im assuming its fubar. If i have time tomorrow i will remove the gauge and run a dmm on the sender wires to see if theres voltage.
Sent from my SM-P600 using Tapatalk
Just thought I'd touch up on this topic again. I have tested my sender unit and there is no voltage change at all when the car is started. So I guess the sender is fubar. Time to ring Redarc.
AJTich (10th November 2015)
AJTich
2004 GUIII, white ST, 3.0L manual wagon, NADS,EGT/Boost,Water Temp/Oil Press gauges, drawers, UHF, stubby cooler on the 4WD selector...
"I don't get bogged, I have unplanned 4WD training activities..."
mudski (10th November 2015)
AJTich
2004 GUIII, white ST, 3.0L manual wagon, NADS,EGT/Boost,Water Temp/Oil Press gauges, drawers, UHF, stubby cooler on the 4WD selector...
"I don't get bogged, I have unplanned 4WD training activities..."
Yeah im questioning the accuracy of the Redarc water temp gauge too. Ive seen it hit 110c on the Redarc gauge, yet the oem gauge doesn't go any higher. I know the oem gauge works though, as on our Dargo trip when we hit the black top on the way back from a day trip, it was a real long down hill run, it was bloody cold outside, both gauges dropped down.
Sent from my SM-P600 using Tapatalk