Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
DP Chip fitting instructions - DP34, NOT CRD MODELS
See the attached PDF for the fitting instructions for a DP34 DP chip. Saves you having to send you chip to DP for a "reprogramme" just so it can get fitted to troll the same as what it came off. And pay through the nose for it.
*disclaimer* these are exact scans for a DP34 to suit a 3litre Direct injection ZD30. YOU MUST check if DP34 is the right chip for you before following these instructions. The instructions are for DP34 ONLY!!!! NOT CRD MODELS
ALSO in the pdf I have added the wiring diagram for the ECU, taken from the already available service pdf, so YOU MUST check if the diagram is the same for your Patrol
I am NOT be responsible for anyone using this diagram
Last edited by mudski; 23rd April 2018 at 02:18 PM.
I know this is a very old thread, but I just wanted to say thanks to Mudski. The information on this forum is unbelievable, so to every one who has ever posted on the DIY threads, or discussed there experience's of any particular mod, THANK YOU. It helps people far and wide, for years to come.
03 ST-L auto, Dawes and needle valve, provent catch can, 3' exhaust. I want more than I got