-
3rd January 2015, 03:22 PM
#11
Advanced
Yeh I think I can order the straight through pipe
-
-
3rd January 2015 03:22 PM
# ADS
Circuit advertisement
-
3rd January 2015, 06:44 PM
#12
Patrol God
Originally Posted by
Remdogg
I think if I was to do it again I would get one with cat and no muffler. Still a bit quiet.
reckon I'd get one with a dog lol.
I have an ordinary alluminized 3" system that's been on for 4 years still going strong
and very quiet a 4 cyl TD diesel noise is not a chick magnet IMO
old school muscle cars yes a ZD30 no
Last edited by threedogs; 3rd January 2015 at 06:46 PM.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
The Following User Says Thank You to threedogs For This Useful Post:
-
3rd January 2015, 09:27 PM
#13
So the diesels are not too loud without a muffler, never knew that. I assume the TB's require one as all kits I have seen are sold with one?
-
-
4th January 2015, 07:01 AM
#14
I'm also interested in hearing how you found the new exhaust. I have been quoted $1,300 for a 3" Redback system fitted but these guys are advertising what appears to be pretty much the same for $605 delivered.
http://www.ebay.com.au/itm/Nissan-GU...item3a88933d45
What would the difference be (apart from the fitting) that justifies the price difference?
2009 ZD30-CRD Patrol ST Wagon. Bullbar, IPF Spotties, Snorkel, BFG285/70R70, 2" OME Lift, Rear Drawers, UHF, Scangauge, VDO Boost and EGT Gauges in an A-Pillar Pod, More bits
-
-
4th January 2015, 11:13 AM
#15
Advanced
That's the same system I have. You can call them up and talk to you them if you have any issues as there is a phone number on the receipt. I'm not sure what you get for double the price. They do stainless as well for less than the others mild steel.
-
The Following User Says Thank You to Remdogg For This Useful Post:
growler2058 (4th January 2015)
-
4th January 2015, 11:42 AM
#16
2009 ZD30-CRD Patrol ST Wagon. Bullbar, IPF Spotties, Snorkel, BFG285/70R70, 2" OME Lift, Rear Drawers, UHF, Scangauge, VDO Boost and EGT Gauges in an A-Pillar Pod, More bits
-
-
4th January 2015, 12:01 PM
#17
SPAMINATOR
Originally Posted by
Remdogg
That's the same system I have. You can call them up and talk to you them if you have any issues as there is a phone number on the receipt. I'm not sure what you get for double the price. They do stainless as well for less than the others mild steel.
Did you fit yourself mate?
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
-
-
4th January 2015, 08:06 PM
#18
Advanced
Originally Posted by
growler2058
Did you fit yourself mate?
Yeh. The heat shield was fun. I used a rattle gun with extensions on half the bolts. Wasn't to bad to do. The boost was flicking around like crazy after. Didn't feel like it but you saw it on the boost gauge. Dawes and needle sorted it out.
-
-
4th January 2015, 08:07 PM
#19
SPAMINATOR
Originally Posted by
Remdogg
The boost was flicking around like crazy after. Didn't feel like it but you saw it on the boost gauge. Dawes and needle sorted it out.
CRD or Di mate?
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
-
-
4th January 2015, 09:54 PM
#20
Advanced
-