-
15th October 2014, 07:16 PM
#1
Patrol Freak
child restraints / CRAB bar installation costs
I recently had a quote for $495+ GST to install a CRAB bar in the rear of my GU patrol with 3 anchor points in similar location to attached photo.
image.jpgimage.jpg
Has anyone had this done recently and if so, how much did it costs? Any ideas on who else could complete this work around Melbourne eastern suburbs so I could get another quote?
Thanks
-
-
15th October 2014 07:16 PM
# ADS
Circuit advertisement
-
15th October 2014, 07:21 PM
#2
Patrol God
Hi mate. Why the need for the crab bar? Is it to accommodate 3 child seat re-straints?
-
-
15th October 2014, 07:27 PM
#3
Patrol Guru
Just booked my gq in to get one $240 fitted. Why do you need one there are points in a gu
GQ Snorkle Lockers front n rear
-
-
15th October 2014, 07:32 PM
#4
Dribble Master
Originally Posted by
89gqpatrol4x4
Just booked my gq in to get one $240 fitted. Why do you need one there are points in a gu
there's only 2 restraint points in a GU behind the middle row and 1 in front of the small barn door for the 3rd row, same as the GQ.......... if memory serves correct
-
The Following 2 Users Say Thank You to Clunk For This Useful Post:
BigRAWesty (15th October 2014), Hodge (15th October 2014)
-
15th October 2014, 07:45 PM
#5
Patrol Freak
Hey hodge the draw system I've got covers the two factory points, so need to replace that and having the 3rd point would be useful if picking up other family or friends kids
image.jpg
Last edited by Bacho86; 15th October 2014 at 08:00 PM.
-
The Following User Says Thank You to Bacho86 For This Useful Post:
Hodge (15th October 2014)
-
15th October 2014, 08:01 PM
#6
Patrol God
Originally Posted by
Bacho86
Hey hodge the draw system I've got covers the two factory points, so need to replace that and having the 3rd point would be useful if picking up other family or friends kids
Makes sense mate. I completely forgot about draws covering the 2 points. Will have to keep this in mind when I eventually fit draws.
-
-
15th October 2014, 08:25 PM
#7
Patrol God
Black widow systems build points into the draws.
Have read it's $20 a point but unsure how old that is..
They have steel draws so unsure who else offers this option
-
-
15th October 2014, 09:26 PM
#8
i got quoted $580 for a bar fitment in a renault master single cab so 240$ sounds bloody good!
-
-
15th October 2014, 09:28 PM
#9
Patrol Guru
I have a crab bar fitted to my GU. Cost $295 I think from a mob in Perth. I would get some other quotes $495 is a bit rich I reckon basically all your paying for is the certification for the bar.
Its well worth getting it fitted if you need 3 anchor points for the middle row of seats.
ImageUploadedByMotorculture1413370735.006728.jpg
-
The Following 2 Users Say Thank You to firm351 For This Useful Post:
Bacho86 (15th October 2014), Clunk (15th October 2014)
-
15th October 2014, 10:05 PM
#10
Patrol Freak
Originally Posted by
biggqwesty
Black widow systems build points into the draws.
Have read it's $20 a point but unsure how old that is..
They have steel draws so unsure who else offers this option
Yeh I saw that information on their website, but I'd assume it only applies to black widow draws that have been specifically designed and tested to accept the points
http://www.bwidow.com.au/child_restraints.htm
-