Stripey's GUII

[Paule]

With your Dawes and needle valve, catch can and egr plate contact mudski on this forum, I used the vdo gauges you r looking at but got em for about $280 (I think) delivered from eBay and I got the same pillar pod just a different colour

[Paule]

The Dawes and needle valve you r looking at is from mudski, that is where I got mine, top bloke

[stripey]

thanks to ebay I now have a pretty bad account balance but I have everything iI need

[Paule]

Let us know how you go with the exhaust as I have been thinking about getting the same one, are you going to fit it yourself?

[stripey]

I will be fitting it myself , and from what others have said about heat shield ill get some rigger gloves before I attempt it

[Paule]

Lol the heat shield is pain in the neck it took me a couple of attempts to get it out. Just make sure you get them to put an egt bung in the dump pipe.

[stripey]

iv got a mate who is a welder so he will weld up the one that came with VDO kit

[stripey]

well i finally got bung welded on to the dump pipe now i can go ahead and fit the exhaust and all the other goodies
DSC_0082.JPG
DSC_0083.JPG
i will make sure every step there are photos nothing worse than looking at a build thread with no pictures

[gubigfish]

Hey Stripey where did you get that USB/Aux adapter from? Any ideas why these head units don't have aux on the front?

[stripey]

Hey Stripey where did you get that USB/Aux adapter from? Any ideas why these head units don't have aux on the front?

here is the adapter

http://www.ebay.com.au/itm/Car-Truck...item5b032a63c7

I guess the headunit is a more refined unit for the people who like clean lines. I only purchased because it was less than half price at jb-hifi