XLR8 Fabrications in Perth make the best sliders around.
http://www.xlr8fabrications.com/
XLR8 Fabrications in Perth make the best sliders around.
http://www.xlr8fabrications.com/
93patrol (9th February 2014), Bigcol (18th June 2016), megatexture (9th February 2014)
Definately solid. XLR8 makes them strong. I think the car will fall apart before the sliders get damaged
If you have a, or access to a welder, make your own! I did and made a solid slider but stuck it out a bit further to use as a side step aswell. also helps keep your car off the rock/ bank/ stump etc. 50 mm internal diameter 3mm wall.
GQ Snorkle Lockers front n rear
I only tacked mine and got someone who can weld to do it properly! I also bought bends as the pipe bender wouldn't get them tight enough for me. Just did exactly the same with my rear bar.
GQ Snorkle Lockers front n rear
megatexture (9th February 2014)
There is a bloke in Gympie, Barworx 4x4, he does sliders with front and rear scrub bars
96 GQ coil/Cab
08 G6eT
megatexture (10th February 2014)
Bolsys.com.au
Really nice bloke. Pretty good prices.
image.jpg
image.jpg
image.jpg
I put the grip tape on, it's awesome for getting in the car when the sliders are wet, cause they are slippery as all hell, but it's a pain in the arrrs when getting out. If you slide out and graze your leg on it, it will make you bleed. You do get used to it tho.
1999 GU DUAL FUEL 4.5 - 2" OME - 33's KM2s - SNORKEL - CUSTOM DINTS.... Goes by the name Candy (the car not me)
After Saturday the wife has agreed that we are in the market for a set as well ! One of my mates sons made his for his 80 series and work well , best bit is he owes favour !
If ya not using it buy a prius .....